Browse low feed conveyors for sale — low profile conveyors designed for ground-level loading without ramps, pits, or elevated feed points. A low feed conveyor has a feed end that sits close to the ground, allowing skid steers, mini loaders, or even wheelbarrows to load material directly onto the belt. GrinderCrusherScreen carries low feed conveyors for mulch yards, landscaping operations, aggregate handling, and recycling facilities. Call 770-433-2670 for pricing and availability.

How Low Feed Conveyors Work

A low feed conveyor uses an inclined belt that starts at or near ground level and rises to a discharge height suitable for loading trucks, building stockpiles, or feeding other equipment. The low feed point eliminates the need for a hopper, loader ramp, or elevated platform — any machine that can push material onto the belt at ground level can feed the conveyor.

The low profile design is especially valuable for:

• Small equipment operations — allows skid steers, mini excavators, and compact loaders to feed the conveyor without needing a ramp or elevated hopper
• Mulch and landscape material — loading bulk bags, trucks, or building small stockpiles from ground-level feed
• Recycling facilities — feeding sorted material from ground-level bins onto a conveyor for transfer or processing
• Temporary operations — quick setup on flat ground without excavating a pit or building a ramp

Low Feed vs. Standard Conveyors

A standard portable conveyor typically has a feed hopper 4-6 feet above ground level, requiring a loader with enough reach to dump into the hopper. A low feed conveyor accepts material at 12-24 inches above ground, which means smaller equipment can feed it effectively.

The trade-off is capacity: a low feed point limits the rate you can load material compared to a large elevated hopper. Low feed conveyors work best for small to mid-size operations where equipment size is limited or where simplicity and quick setup are priorities.

What to Check Before You Buy

Inspect the belt for wear, especially at the low transition point where material impacts the belt from ground level. Check the take-up tension system and return rollers. Inspect the incline frame for straightness and structural integrity. Verify the drive system and power source operate correctly.

Browse all conveyors and stackers.

Find the Right Low Feed Conveyor

Browse our current low feed conveyor inventory below, or call 770-433-2670 to talk with our team. Financing available on all equipment.