Morbark Grinder Screens

Morbark is one of the most widely used grinder brands in North America. GrinderCrusherScreen builds replacement screens for all major Morbark tub and horizontal grinder models. Tell us your model, your target output size, and what you are grinding. We confirm the spec before we build. Call 770-433-2670 or submit a quote request to get started.

Models We Build Screens For

Tub Grinders: 950, 1000, 1100, 1200, 1300, 1400

Horizontal Grinders: 3600, 4600, 5600, 6400XT, 6600, 7600

Don't see your model listed? That doesn't mean we can't build it. Call 770-433-2670. If we have the drawing or you can provide measurements, we can quote it.

Ordering Your Screen

Have these details ready before you call or submit a quote request:

Machine model: 950, 1200, 5600, 6400XT, etc.

Target output: What are you producing? Mulch, biomass, wood chips, or compost feedstock.

Material type: Green wood waste, stumps, land clearing debris, C&D wood waste, or mixed material.

These three pieces of information let us confirm the right hole size, pattern, and steel grade for your machine and application.

Available Specifications

Hole Sizes: 1", 1-1/2", 2", 2-1/2", 3", 3-1/2", 4", 4-1/2", 5", 6", custom

Hole Patterns: Round, Square, Diamond, Hex

Steel Grades: A572 (mild steel), AR400/FM400 (harder, longer life), AR450 (hardest option for most abrasive materials)

Not sure which hole size fits your application? Read the Grinder Screen Size Guide before you order.

For tub grinder-specific screen information, see tub grinder screens. For horizontal grinder screens, see horizontal grinder screens.

Lead Time and Ordering

Lead times vary by machine type. Your sales rep will provide a current timeline when you request a quote. Call 770-433-2670 or submit a quote request below to get started.

Frequently Asked Questions

Do you make screens for Morbark models not listed here?

Yes. The list above reflects models we have drawings on file for. If your model is not listed, call 770-433-2670. If you can provide measurements or a drawing, we can build the screen.

What hole size should I use for bulk mulch production on a Morbark?

Most mulch producers run 2" to 3" holes depending on product spec and customer requirements. A 2" hole gives a finer finished product. A 3" hole increases throughput. Read the Grinder Screen Size Guide for a full breakdown by application.

How do I know when my Morbark screen needs replacing?

Output that runs too coarse, visible wear on the hole edges, or bent screen sections all signal it is time to replace. Read When to Replace Your Grinder Screens for a full walkthrough.

Call 770-433-2670 or submit a quote request. We confirm your fit before we build.

Back to Grinder Screens