Demo Olnova 5
Track suspension and hook lift provide high maneuverability and mobility. Quick Shaft replacment ...
2011 AIR BURNERS S-327
Refreshed in 2025 with only 153 burn hours recorded since the work. Who This Machine Is For - L...
2023 AIR BURNER S-119
2023 Air Burners S-119 Air Curtain Burner Who This Machine Is For - Land clearing and demolitio...
2019 ALLU DH3-17
Less than 100 hours on the grinder. Only used for sheetrock. 1" spacing. Axe blade teeth in great...
1999 ARASMITH 34x60 - HORIZONTAL GRINDER
34x60 mill mounted on modified flatbed trailer (to let chips fall out under the mill). Mill needs...
2021 ARJES IMPAKTOR 250
Cassette replaced 275 hrs ago or 2,600 hrs diagnostic equipment included minus laptop, extra wear...
2019 ARJES IMPAKTOR 250
The ARJES Impaktor 250 is known for its versatility, allowing operators to switch between differe...
2021 ARJES IMPAKTOR 250
In August 2021 (440 hrs), a new hydraulic motor was installed on the magnet discharge. A second h...
2022 ARJES IMPAKTOR 250
2022 ARJES Impaktor 250 track-mounted slow-speed shredder with approximately 1,100 hours. Powered...
2024 ARJES IMPAKTOR 250
A 2024 Arjes Impaktor 250 with just 204 hours — that’s barely broken in at around 200 hours per y...
2024 ARJES IMPAKTOR 250
New piece with no hours. Paddle shafts (2 total) only to be used for wood, green waste, and tires...
2022 ARJES IMPAKTOR 250
This ARJES Impaktor 250 also includes a remote control and one extra shaft, giving the buyer an a...
2023 ARK J-2716
The ARK J-2716 is expertly designed for operators who require a versatile and mobile jaw crusher....
2015 ACTION DENSE-OUT AIR VIBRATOR
The Action Dense-Out Vibrator is built to separate light and heavy materials using a combination ...
2017 ACTION DENSE-OUT VIBRATORY
The Action Dense-Out Vibratory is built to separate light and heavy materials using a combination...
2014 BACKHUS 21.55
BACKHUS 21.55 was refurbished and serviced by Ecoverse, including installation of a new Cummins e...
2024 BADGER B-600
This low-speed, twin-shaft shredder reduces reinforced concrete while separating exposed steel fr...
2004 BANDIT BEAST 4680T - HORIZONTAL GRINDER
New conveyor, new mill bearings, engine inspected by Cat and checked out A+. Very good condition....
2010 BANDIT BEAST 4680T
Has some bigger size screens that go with it, and some teeth. Well maintained and ready to work. ...
2024 BANDIT BEAST 2460XP
Excellent condition. Equipped with a 60" wide by 30" diameter cuttermill and a 24" high x 60" wid...
2025 BANDIT BEAST 3680TK
This tracked grinder combines a 1,000 HP CAT C27 engine with a large mill opening for high-volume...
2015 BANDIT BEAST 2680
A 2015 Bandit Beast 2680 with just 652 hours — that’s extremely low use at about 60 hours per yea...
2012 BANDIT BEAST 3680 RECYCLER
Light use, excellent condition. Very well maintained machine. New teeth and parts installed, pote...
2021 BAUER RAINSTAR 65TX
Excellent condition. Splitter mobile: Diesel engine 35-55 kW, thoughput 100 m³/h. Hours: Unknown | Engine H...
1998 BECKER UNDERWOOD SECOND HARVESTER 200
Mulch coloring machine. New mixing arms and paddles with less than 20 hours on them. On board col...
2016 BEYER BM2010-R3
Diesel/Hydraulic Foster power pack (at 15.1 hours) with machine. Reduce price (was $79,900) Hours: 15.1 (on...
2017 BEYER BM2512
The Beyer BM2512 is known for producing multiple finished products in a single pass, making it a ...
2006 BRADCO 165-5
2006 Bradco Mulching Head 165-5 Who This Machine Is For - Land-clearing contractors — reduces s...
2022 Barford J750
2022 Barford 750J - 700 x 500 (28” x 20”) Tracked Dual Power Jaw Crusher. Hours: 1000 | Engine Hours: 1000
2023 BARFORD R8048TR
80' x 48" Barford R8048TR Tracked Radial Stockpile Conveyor Ultra low sulfur diesel fuel Equipm...
2023 BARFORD TR100-48
2023 Barford TR100-48 track mounted conveyor. 100'x48" conveyor Engine 134HP CAT 4.4 Diesel En...
2023 BARFORD BF7048M
The Barford BF7048 is known for efficient material handling, helping aggregate, recycling, and co...
2020 CAMS UTM1500-3
(+T15) 2020 CAMS UTM1500-3 2020 CAMS UTM1500-3 — only 103 hours, which is extremely low and clo...
1992 CAT 325
Comes with a new KJ AM2048 bucket. The shear in the pictures does not come with it. Hours: Unknown | Engine ...
2006 CAT HM315
A lightly used CAT HM315 that spent most of its life in storage is hard to find. This hydraulic m...
2005 CBI 6800T
Well maintained grinder. Ready to work. 7,500 hours on a 2005 CBI 6800T. Who This Machine Is Fo...
2007 CBI 6800T
A 2007 CBI 6800T with 13,537 frame hours and 11,993 engine hours. The 6800T is one of CBI’s large...
2022 CBI 6800CT
The CBI 6800CT is one of the best-known horizontal grinders in the land clearing, biomass, and wo...
2005 CBI CUSTOM GRINDER LINE
This 2005 CBI Custom Grinder Line combines a horizontal grinder with an integrated sorting and co...
2021 CBI 5400BT
This 2021 CBI 5400B is a track-mounted grinder built around field-swappable rotors, letting one m...
1994 CBI ROADMILL - HORIZONTAL GRINDER
Reduced price (was $199,900) QB 1994 CBI Roadmill 6,752 hours on a 1994 CBI Roadmill — that’s ...
2003 CEC 5X12
This 2003 CEC 5×12 has approximately 12,000 total machine hours, but it now has a brand-new engin...
Custom Built 2 Shaft Shredder
Custom Built 2 Shaft Shredder Custom Built 2 Shaft Shredder — electric-powered unit with a simpl...
2001 DIAMOND Z 1463B
Needs wiring work. Operational, converted to manual motor. 2001 Diamond Z 1463 5,000 hours on a...
1994 DIAMOND Z 1248
1994 Diamond Z 1248 has received several major component upgrades, making it an excellent option ...
1994 DIAMOND Z 1463
1994 Diamond Z 1463’s twin CAT engines was recently rebuilt and has approximately 300 hours. The ...
2019 DIAMOND Z DZH4000TK
2019 Diamond Z DZH4000TK 2019 Diamond Z DZH4000TK — 7,200 hours on both frame and engine, with m...
2017 DIAMOND Z TKT6000
This 2017 Diamond Z TKT6000 has undergone a complete frame-up rebuild and has only 5 hours since ...
2021 DIAMOND Z DZT8000TKT
It runs well and gives high-volume grinding operations track mobility for working around uneven s...
2022 DIAMOND Z DZH7000TK
Diamond Z 7000 freshly serviced, hammers have 500 hours, brand new feed chain, brand new phase 1 ...
2018 DIAMOND Z DZH4000TK-59
2018 Diamond Z DZH4000TK-59 9,000 hours on a 2018 Diamond Z DZH4000TK-59 — that’s roughly 1,285 ...
1994 DIAMOND Z 1260
This 1994 Diamond Z 1260 has received major work across the mill, tub, driveline, conveyors, hydr...
1996 DIAMOND Z 1463
This 1996 Diamond Z 1463 has 11,000 hours. Who This Machine Is For - Land-clearing contractors ...
2013 DOPPSTADT DW3060K
Will come with full fresh service, full fluid flush. Includes new set of extra teeth. Has cord re...
2016 DOPPSTADT SM514
Like new. 1" screen installed. Ready to work. 2016 Doppstadt SM514 2016 Doppstadt SM514 — only ...
2023 DOPPSTADT AK315
2023 Doppstadt AK 315 High-Speed Horizontal Grinder. Features Patented-load sensing material fe...
2025 DOPPSTADT SM720.2
The SM720.2 is known throughout the recycling and compost industries for its quick drum change sy...
2011 DOPPSTADT DW3060
Its bottom conveyor frame was completely rebuilt and reinforced last year, and a new conveyor bel...
2023 Develon DL280
Good condition, ready to work. Comes with forks, quick coupler and 3.5 bucket. Reduce price (was...
2023 Doosan DX300LC
Good condition, ready to work. Reduce price (was $189,000) Overall width of upper structure: 9'...
1998 Duratech HD12
Very strong running grinder. Has magnet and extended conveyor. 1998 Duratech HD12 800HP on a Du...
2018 EDGE TRT622
Excellent condition, the engine is a Tier 3. Ready to work. 2018 EDGE TRT622 2018 EDGE TRT622 —...
2019 ERIEZ MAGNETIC HEAD 24"X 60"
New 2019 Eriez Magnetic Head Pulley is a magnetic separator designed to recover ferrous metals di...
2019 ERIEZ MAGNETIC HEAD 24"X 60"
New 2019 Eriez Magnetic Head Pulley is a magnetic separator designed to recover ferrous metals di...
2003 EXPRESS BLOWER EB40
The 2003 Express Blower EB40 with a CAT 3126 engine, was remanufactured in 2024. New pumps and PT...
2004 EXPRESS BLOWER EB60
Rebuilt motor completed by previous owner Machine runs very well and is in fair condition. No add...
2005 EXTEC C12
Used condition - New belt (under 2000t put through), belt scale calibrated last year. Approx. 6,0...
1998 Enviroquip 7x20ft
Good working condition, downsizing operations. Fines conveyor only. Needs two tires. 1998 Enviro...
2012 FECON CM200D-5
2012 Fecon CM200D-5 2012 Fecon CM200D-5 — 6,577 hours, which is roughly 500 hours per year. This...
2019 FECON FTX-150
This Fecon FTX150 is in good condition, with tight tracks and undercarriage components and carbid...
2003 FINN BB1216
This FINN BB1216 also includes eight new rear tires, an upgraded remote, and new drivetrain parts...
2013 FRONTIER TB14
Good to excellent condition. Only used once a year. Nearly complete set of paddles included. Red...
1995 FRONTIER F18
1995 Frontier F18 1995 Frontier F18 — only 981 hours, which is roughly 30 hours per year. That i...
2019 TEREX FINLAY C-1545
・Engine: STAGE IV - SCANIA (450 hp) ・Belt: 40” ・Hopper: 7,8 yd3 ・Cone diameter: 45” ・Length: ...
2001 Freightliner FL80 EB40
Mileage is 188,798. Brand new control panel with 0 hours. Automatic transmission. Engine: 7.2 liter Cummins
2012 GENERAL KINEMATICS SCD 96x20
Finger Screen Vibratory Classifier. It is a 2 deck Finger Screen Vibratory Classifier. Top deck...
2026 GOOSENECK 20 YARD TRAILER
2026 Heavy Duty Gooseneck Dump Trailer – 20 Yard Stock #CK261208-5 A 20-yard heavy duty goosene...
2013 HYSTER S60FT
5,640 engine hours on a 2013 Hyster S60FT. Fortis-series forklift functions as intended and is re...
2013 HAMMEL VB850DK
This 2013 Hammel VB850DK has just 200 hours on a complete factory rebuild. That resets the machin...
2006 Hartl 12701
28"X49" Hartel crusher. Extra blow bars and a few misc parts. Dimensions are: 38' L 8' 4" W 1...
2006 Hogzilla TCII 1564
Excellent condition grinder. Option: Tire mill: $35,000 2006 Hogzilla TCII 1564 3,800 hours o...
2014 INTERNATIONAL TRANSTAR 8600
This International TranStar 8600. Its tandem-axle day-cab configuration is intended for local and...
2012 IPF 513EC
・Loading hopper: 13’-3’’x 5’ -10’’ ・Drum diameter: 5’-0" ・Feed belt: 36” ・Length: 47'-0" ・Wid...
2021 IROCK TC15
The IROCK TC-15 is known for its large impact chamber, heavy-duty tracked design, and exclusive R...
2024 IROCK TJ2745
This tracked IROCK TJ-2745 provides a 45-by-27-inch jaw opening for primary crushing with very li...
2023 IROCK MT8036
80' x 36" IROCK MT8036 track mounted stacking conveyor. Engine 49HP CAT C2.2 Conveyor 80' lon...
2022 IROCK TC20
This IROCK TC-20 combines a large horizontal-shaft impactor with a 36-inch cross-belt magnet for ...
2019 JEFFREY RADER WOOD HOG 45WBE
This 2019 Jeffrey Rader Wood Hog 45WBE is a stationary grinder with an 11-foot-2-inch overall len...
2019 JEFFREY RADER WOOD HOG 45WBE
This stationary hammermill fits facilities that need a dedicated machine for sizing wood, bark, a...
1995 Jeffrey 59WB
Hours: Unknown | Engine Hours: Unknown | Engine: Electric | Height: 5'-4" | Width: 7'-0" | Length: 9'-1"
2021 John Deere 210G LC
Good condition. Needs nothing and ready to work. All servicing is up-to-date. 40" bucket, 3rd val...
2019 KEESTRACK R6E
The Keestrack R6e is known for its high production capacity, fuel-efficient design, and ability t...
2014 KEESTRACK COMBO
This 2014 Keestrack Combo is set up with 2-inch square screens for dirt screening. Its compact, t...
2024 KOMPLET K-JC704
2024 Komplet K-JC704 Jaw Crusher powered by a Tier 4 Final diesel engine. Features hydraulic jaw ...
2014 KOMPTECH TERMINATOR 6000S
Complete overhaul and rebuild. New hydraulic package, new shredding drum, new belts and repainted...
2022 KOMPTECH CRIBUS 2800
Cribus 2800 with Perkins Tier 4 Final engine 19mm solid punch plate drum. Drum brush cleaning sys...
2017 KOMPTECH S3
Its compact, wheel-mounted design suits operations that need three-fraction screening without a l...
2021 KOMPTECH BALLISTOR 4300
Includes trailer + generator + conveyors for mobile setup. Wacker Neuson G50 38Kw generator. Gene...
2011 KOMPTECH TOPTURN X67
New cab filters, fresh service, and ready to work. Excellent condition. Low hours. Extra paddles ...
2010 KOMPTECH L3
Hybrid star screen. Runs great. Reduce price (was $165,000) Hours: 2300 | Engine Hours: 2300 | Engine: Dies...
2021 Komptech L3
Excellent condition. Ready to work all functions work properly. Both star decks are in great shap...
2024 KUBOTA KX057-5
Only 62 hours on it. Has: - Hydraulic coupler - Hydraulic thumb - HD 36" tooth bucket and pins Hours: 62
2002 Kenworth T800
2002 Kenworth T800 60 yard express blower truck. Well maintained, new transmission, new small PTO...
2006 KENWORTH T800
This 2006 Kenworth T800 has 538,000 miles on the truck body, but the drivetrain tells a different...
2022 LS MTRON MT225HE
Who This Machine Is For - Small acreage owners - Handles mowing, material handling, driveway mai...
2018 Lamtrac 6140
Very good conditions. Hours: 2191 | Engine Hours: 2191 | Engine: 140HP Cummins | Length: 11'-4" | Width: 6'-1"
1998 MAC TRACTOR
This equipment package includes a 1998 MAC tractor, a 50-ton lowboy trailer, and an 86-cubic-yard...
2006 MCCLOSKEY 621RE
This and one other 621RE available as listed below: - 2005 with 4665 hours - $185,000 2006 McCl...
2004 MCCLOSKEY 621
Well maintained trommel, ready to work. Has new tires, all brakes and lights work. It also comes ...
2022 MCCLOSKEY J45
2022 McCloskey J45 Jaw Crusher with Belt Protection Deflector Plate. Features Overband Magnet o...
2012 MCCLOSKEY 621RE
It has new injectors and a new fuel pump, and service has been completed regularly at 200 hour in...
2018 MCCLOSKEY 733
The screener is equipped with a 2-deck vibrating grizzly with a self-cleaning finger deck, a 174 ...
2018 MCCLOSKEY R230
New main discharge belt last year, comes with extra screens. Hours: 4500 | Engine Hours: 4500 | Length (Tran...
2007 MCCLOSKEY 628REG
2007 McCloskey 628REG wheeled trommel screen with three auxiliary hydraulic connections. Grid is ...
2006 MCCLOSKEY 628
3353 hours on remanufactured engine. Runs, but needs a screening drum. 2006 McCloskey 628 2006 ...
2018 MCCLOSKEY 628RE
2018 McCloskey 628RE 2018 McCloskey 628RE — electric-powered production trommel designed for hig...
2023 MDS M515
A new CAT engine with only 9 hours is the standout feature on this 2023 MDS M515. It also include...
2008 METSO LT-1110
The machine remains in good condition, and several hydraulic hoses have already been replaced. W...
2017 MOBILE BAG-FILL SYSTEM
MAKE AN OFFER! - Patented dustless filling nozzle which can fill paper or plastic bags. - Nozzl...
1993 MORBARK 1000 - TUB GRINDER
Has 4 new tires. 1993 Morbark 1000 The Morbark 1000 is a compact, proven tub grinder known for ...
2014 MORBARK 1000
Very good condition. 2014 Morbark 1000 511 hours on a 2014 Morbark 1000 — that’s roughly 45 hou...
1999 MORBARK 5600
1999 Morbark 5600 16,601 hours on a 1999 Morbark 5600 — that’s roughly 640 hours per year on a p...
2023 MORBARK 3400XT
2023 Morbark hammermill model 3400 tree grinder is in good condition and includes extra parts suc...
2021 MORBARK 6400XT
Morbark 6400XT (2021) – Track Horizontal Grinder 2,388 hours on a 2021 Morbark 6400XT — that’s r...
2009 MORBARK 50/48
A 1,050 HP CAT engine and 6,127 hours make this 2009 Morbark 50/48 a serious production machine. ...
2007 MORBARK 1300
Nice, well maintained grinder. 2007 Morbark 1300 8,312 hours on a 2007 Morbark 1300 — that’s ro...
1999 Morbark 1300
1999 Morbark 1300 Tub Grinder in good working condition and ready to go to work. The motor was co...
2001 MORBARK 13
2001 Morbark Model 13 Brush Chipper This 2001 Morbark Model 13 has just 165 original hours — rou...
2008 MORBARK 30/36
This Morbark 30/36 runs great, operates as it should, and includes the Mor-Lift Model 180 loader ...
2003 MORBARK 5600 - HORIZONTAL GRINDER
Good running grinder. California permitted till 4/30/2020. Reduced Price: was $145,000 2003 Mor...
1996 MORBARK 1300 - TUB GRINDER
Very nice, clean and well maintained grinder. Extra, new 3" screen. Ready to work. Reduced Price...
1998 MORBARK 1200
Morbark 1200 tub grinder primarily used for regrinds for finished mulch. Runs good but will need ...
2012 MORBARK 3800
Clean machine used for grinding brush and double grinding for mulch products, extra parts and scr...
2012 MORBARK 6600
2012 Morbark 6600 (Electric) 20,000–25,000 hours on a 2012 Morbark 6600 — this is an electric-po...
2008 MORBARK 3800
2008 Morbark 3800 wheel mounted horizontal grinder Who This Machine Is For - Mulch producers — ...
2010 Morbark 50/48
Built for high-volume forestry and biomass operations, the 50/48 has earned its reputation for ha...
1995 MORBARK 1400
This 1995 Morbark 1400 is currently working every day for both primary grinding and regrinding. I...
2013 MORBARK 3200
This electric 3200 Wood Hog fits stationary operations with a compatible power supply and no need...
2005 MORBARK 20/36
2005 Morbark 20/36 Whole Tree Chipper Stock #CK261208-4 This 2005 Morbark 20/36 shows 2,443 hou...
2000 MORBARK PT618
Good running trommel and it has a color system that is included that can do up to 160 yards per h...
1999-2009 Mark, Kalyn, ITI GU716, SOS-42, 45
PACKAGE DEAL ONLY. Mack GU716 tri axle road tractor 680,000 miles and 18 speed trans. Kayln 60 ...
1994 Maxigrind 425G
Ram-fed grinder with cab and loader in really good overall shape. Clutch, conveyor bearings, mill...
2017 Metso LT1213S
Has a cross magnet. Reduce price (was $495,000) Hours: 2231 | Engine Hours: 2231 | Engine: 200HP CAT C13
2023 METSO NORDTRACK S2.11
2023 Metso Nordtrack S2.11 mobile scalping screen. Ultra low sulfur diesel fuel Equipment-certi...
2022 METSO ST3.8
2022 Metso ST3.8 mobile precision screen Ultra low sulfur diesel fuel Equipment-certification c...
2018 Multiquip WT5 Sprayer
A new engine and pump address the two main working components on this 2018 Multiquip WT5. The 525...
NEW HOLLAND 379 - TUB GRINDER
Bale buster converted to bark and chip grinder. Approx 40-50 YPH production. Unit as 1", 2-1/2", ...
1990 Norkot 9100
Ram feed horizontal grinder. Great for pallets, light brush. Reduce price (was $109,000) 1990 N...
2015 ORBIT 68D
148" long -2.0 cubic yard hopper/feeder. Series 60 - 6 foot screen dish. 20"X13' overs convyor (b...
New Olnova 75 DK
The OLNOVA 75 DK is a high-performing, track mounted shredder engineered to deliver exceptional p...
New Olnova 95 DK
The Olnova 95 DK is a heavy-duty, track mounted shredder built for serious productivity. Powered ...
2014 PETERSON PACIFIC 6700D
The Peterson 6700D is known for its high-capacity grinding, large feed opening, and ability to pr...
2018 PETERSON PACIFIC 4710D
Who This Machine Is For - Land clearing contractors - Track mobility and high horsepower work we...
2006 PETERSON PACIFIC 4710B
Machine is in great condition and ready to work. 2006 Peterson 4710B 9,100 hours on a 2006 Pete...
2003 PETERSON PACIFIC BT60
BT60 blower on Peterbilt 357 truck. Who This Machine Is For - Erosion control contractors — app...
2017 PETERSON PACIFIC 5710D
2017 Peterson Pacific 5710D 4,400 hours on a 2017 Peterson Pacific 5710D — that’s roughly 550 ho...
2011 PETERSON PACIFIC 5710
The CAT C27 has approximately 500 hours since rebuild, while the mill, hydraulics, and several fe...
2001 POWERSCREEN COMMANDER 510
2001 Powerscreen Commander 510 screening plant. Who This Machine Is For - Topsoil producers — s...
1995 POWERSCREEN 616
A 1995 Powerscreen 616 with a brand new Deutz engine — that’s the expensive part already handled....
2016 POWERSCREEN WARRIOR 600
The Powerscreen Warrior 600 is known for its portability, quick setup, and ability to screen a wi...
2001 POWERSCREEN 725
2001 Powerscreen 725. It was refurbished just over a year ago with new paint, guide rollers, bear...
16X20 PRECISION FEEDER CW DIRECTION
16x20 Rotary airlock feeder designed for blower truck applications. Manufactured by Precision Mac...
2024 PRONAR MRW2.65
2024 Pronar MRW2.65 35 hours on a 2024 Pronar MRW2.65 — that’s essentially a new machine with mi...
2024 PRONAR MRW2.75G
2024 Pronar MRW2.75G 91 hours on a 2024 Pronar MRW2.75G — that’s still in early-life condition f...
2022 PRONAR MRW2.85G
This tracked, twin-shaft slow-speed shredder is in good condition and ready for demanding materia...
2025 PRONAR MRW2.85G
his low-speed, twin-shaft shredder gives buyers tracked mobility with very limited operating time...
2000 PURITAN ELECTRIC
The Puritan Electric Magnetic Head Pulley provides continuous ferrous metal separation while mate...
2000 PURITAN POW-R CLEAN
The Puritan POW-R Clean magnetic head pulley is a simple and effective way to remove ferrous meta...
1996 Peterson 4400B
1996 Peterson 4400B 5,300 hours on a 1996 Peterson 4400B — that’s roughly 180 hours per year on ...
2017 Peterson BTR70
Trailer is ready to go to work. A couple of work lights are missing. Machine is in good condition...
2008 Progrind H3060
Grinder has been used for pallet grinding for the last several years. Good running grinder. 2008...
2018 Pronar MPB20.72G
Trommel in good condition. Drum is 24' and has 3/4" holes. 2018 Pronar MPB20.72G 2018 Pronar MP...
2014 RAYCO RH1754-240
Has a new cummins engine. Has a new out feed belt, 2 extra new belts come with it. Screens sizes ...
2011 RED RHINO 2000 - JAW CRUSHER
Small crusher. Includes small conveyor. Jaw aperture of 400mm x 170mm. Average output capacity o...
1999 REXIUS EB60
A 1999 Rexius EB60 mounted on a Freightliner FL112 chassis with a CAT C15 engine and 234,133 mile...
2014 ROBI MM234 - SCREENER
Excellent condition. DB REQUIREMENTS: 77,000 lb Excavator - or - 26,000 lb Loader | Weight: 7,055 lbs
1998 EXTEC ROBOTRAC
Everything reportedly operates on this 1998 Extec Robotrac, and it includes both screens and griz...
2017 ROTOCHOPPER B66
This 2017 Rotochopper B66 is a track-mounted horizontal grinder powered by a 765 HP CAT C18 engin...
2017 ROTOCHOPPER B66L
Certified engine rebuild from CAT, still has warranty left. Has a transport dolly. Infeed chain m...
2011 ROTOCHOPPER Go-Bagger 250
Comes with 2 cubic foot mulch attachment plus 1 cubic foot rock attachment. Hours: Under 200 hrs | Engine: 2...
2018 ROTOCHOPPER GO BAGGER 250
It is in great condition and includes a bag flattener and sealer for an efficient packaging proce...
2015 ROTOCHOPPER B66
This machine is a good clean machine, comes with the color pump. Machine has mainly done regrind/...
2001 ROTOCHOPPER SB24E
2001 Rotochopper SB24E 2001 Rotochopper SB24E — an electric horizontal grinder designed for stat...
2001 ROTOCHOPPER SB24E
2001 Rotochopper SB24E 2001 Rotochopper SB24E — an electric horizontal grinder designed for stat...
2019 RR EQUIPMENT REBEL CRUSHER
The RR Equipment Rebel Crusher is known for combining a compact footprint with the ability to pro...
2024 RR EQUIPMENT 24x40 Hydraulic Conveyor
Like new, set of 4 RR Equipment 24x40 hydraulic conveyors. Hours: 900 | Engine Hours: 0
2022 RUBBLE MASTER RM70 GO!
Hours: 540.65 | Engine Hours: 540.65 | Engine: John Deere | Length (Transport): 43'-7" | Width (Transport):...
2023 RUBBLE MASTER RM70 GO!
Hours: 925.72 | Engine Hours: 925.72 | Engine: John Deere | Length (Transport): 43'-7" | Width (Transport):...
2009 RUBBLE MASTER RM70 GO!
Has a magnet belt and comes with screener OS80. Panels are repainted. Machine is in good working ...
2019 Red Rhino 7000 PLUS
Extended fines conveyor. (+T10) Hours: 990 | Engine Hours: 990 | Length (Working): 28'-4" | Length (Transpo...
2023 Red Rhino 7000 PLUS
Includes Sonic Eye for feeder (+T10) Hours: 250 | Engine Hours: 250 | Engine: 75HP Cat | Length (Working): ...
2015 Rotascreen 70'x10'
Two 70' x 10' screens complete with support steel, drives, gearboxes, rollers, chains, motors, an...
2015 SANDBAGGER MULTIBAGGER
3-chute bagger. Spillover shields, safety screen, agitator, auger, vibrator, foot pedal control f...
2015 SANDVIK QE341
Great working condition, everything works as it should. Has been well maintained. Steel Apron Fe...
2001 SCARAB 18
This Scarab Model 18 is exceptionally clean and built for turning large compost windrows in a sin...
2006 SCARAB 18
Good working condition. Downsizing operation D5 Cat tracks. 2006 Scarab 18 2006 Scarab 18 — 8,5...
2014 SCARAB 20
A 20-foot-wide x 10' tall compost turner is built for serious composting operations. Who This Ma...
2015 SCREEN MACHINE MIGHT 2
The 2015 Screen Machine Might II is a compact trommel screen built for contractors, landscapers, ...
2024 SCREEN MACHINE SCALPER 107T
The Scalper 107T is known for its heavy-duty construction, large feed opening, and dual-screen-bo...
2023 SCREEN MACHINE 4043
This Screen Machine 4043 uses a 40-by-43-inch horizontal impactor for mobile concrete, asphalt, a...
2007 SCREEN USA HM35D2
Good working order including the tipping grizzly with remote control. Who This Machine Is For -...
2020 SCREEN USA TC6036
This Screen USA TC6036 is reported to run well and offers a 60-foot conveyor with a 36-inch belt ...
NEW SCREEN USA VERTICAL MIXER
New Screen USA vertical mixer for blending sand and organic materials. Equipped with a 10 HP elec...
NEW SCREEN USA 4 BIN HOPPER FEEDER
New portable 4-bin hopper feeder with separate belt feeders and a shared collecting conveyor. PO...
1999 SCREEN USA TS4012
This machine is in very good working condition and ready for use. It shows light surface rust acr...
NEW SCREEN USA 3 BIN BLENDER
New portable 3-bin blender for sand and organic materials. Includes two sand feeders, one organic...
2016 SCREEN USA TROM512
CAT Engine inspection done in April. All filters changed. All new fuel, oil, and coolant added. F...
NEW SCREEN USA ROAD PORTABLE RADIAL STACKING CONVEYOR WC8036 QD QUARRY DUTY
80' long, 36" wide conveyor made in the USA! ENGINE - 47.6HP Yanmar Tier 4 Final diesel FRAME ...
NEW SCREEN USA 2 BIN HOPPER FEEDER
POWER - Electric: Two 5 HP feeder motors and one 10 HP collecting conveyor motor. - Requires 460...
NEW SCREEN USA 3 BIN HOPPER FEEDER
New portable 3-bin hopper feeder with individually controlled belt feeders and a shared collectin...
NEW SMI CH30R
30' Pit Portable Radial Stacking Conveyor SMI CH30R (No Diesel Module). Requires 10.5 GPM. 6 GPM....
NEW SMI 20SJ
(3) New Units Available. Skid Steer Hydraulic Powered. Jaw Opening: 10" x 20" 26 GPM at 1750 PS...
2024 SMI 50TJ
This compact tracked jaw crusher gives contractors on-site crushing capacity without the size of ...
2007 SOMERSET ALF-04
This 2007 Somerset ALF-04 combines an 80,000-pound GVWR with a walking-floor unloading system. It...
2019 STANLEY BREAKER MBXP4035
Fits a Komatsu PC360 excavator. Who This Attachment Is For - Demolition contractors — Breaks re...
2019 STANLEY BREAKER MBXP4035
Fits a Komatsu PC360 excavator. Who This Attachment Is For - Demolition contractors — Breaks re...
STANLEY MBX608 - BREAKER
New seals, 2 tool bits, 2 mounting plates, mounting bracket with pins, and owner's manuals included.
2024 Screen Machine Spyder 520TS3
Nearly new condition. Hours: 160 | Engine Hours: 160 | Length (Working): 58'-7" | Width (Working): 59'-2"
2025 Shandong Hongxin SXGS-218
- Capacity: 20-30m3/h - Blader drum diameter: 800mm - Drum speed: 650rpm - Maximum wood diamet...
2021 Sittler Bagger
Currently bag 16x 28 inch-bags and can bag up to 100 bags per hour. It has a two-stage scale, all...
1992 STUMP MASTER 6A
The 1992 Stumpmaster 6A is a heavy-duty tub grinder built for processing wood waste, brush, and o...
1992 Stump Master 1260
1992 Stump Master 1260 475HP on a Stump Master 1260 — this is a straightforward tub grinder buil...
2014 TEREX Finlay J1170
Machine needs drive motor bearing replacement. Inspected by mechanic. Repair sheet with all the p...
2023 TEREX TTS620T
The Terex Ecotec TTS 620T is known for its fast drum changes, easy maintenance access, and abilit...
2021 TEREX PHOENIX 2100
A 2021 Terex Ecotec Phoenix 2100 with 2,332 hours is a relatively low hour machine for a producti...
2020 TEREX CBI MAGNUM 5800BT
This 2020 Terex CBI Magnum 5800BT is in good running condition with recent CAT warranty repairs. ...
2014 TERRA SELECT T7
The Terra Select T7 is known for its dependable screening performance, simple maintenance, and ab...
2023 TANA SHARK 440DT
Its tracked undercarriage lets an operator reposition the shredder around a recycling or debris-p...
2008 Terex Pegson 428 Trackpaktor
Machine is fully functional and ready to work. Hours: 14807 | Engine Hours: 14807 | Engine: CAT C15 | Weight...
1999 Torit 96HTP-8
1999 Torit 96HTP-8 Dust Collector This 1999 Torit 96HTP-8 is going on 27 years old and still run...
2016 UNIVERSAL REFINER RMAG 92
Well cared for and ready to work. Equipped with all upgrades from the maufacturer including 2 spe...
1998 UNIVERSAL REFINER PDR-80-47
In 2020 complete dealer ground up conditioned grinder. 1 hour on a rebuilt engine. Has $15,000 in...
2022 VECTOR VT50
A 2022 Vector VT50 with 1,850 hours — that’s low use for a track conveyor, averaging about 600 ho...
2023 VECTOR VT50
A 2023 Vector VT50 with just 665 hours — that’s roughly 300 hours per year. Light use, clean cond...
2017 VERMEER HG6800TX
Includes transport dolly and some extra parts. Clean, well maintained grinder. Repairs done with...
2015 VERMEER HG6000
Well maintained. Includes some extra parts (screens, tips, filters). Reduce price (was $325,000)...
2015 VERMEER TR620
Has extra 2" screens and 1 1/4". Very nice machine. Used a lot for coloring mulch. 2015 Vermeer ...
2003 Vermeer HG525
Runs and operates. Needs anvil replaced as well as a few hammers and teeth. Both conveyor belts w...
2018 VERMEER HG6000TX
This track-mounted Vermeer is reported in very good condition, includes several extra parts, and ...
2020 VERMEER TR521
It is already fitted with 1/4-inch screens for operations producing a fine finished product. Who...
2021 VERMEER TG5000
This 2021 Vermeer TG5000 shows 2,095 hours. It's ready to work now, powered by Vermeer's largest ...
2007 VERMEER CT670 - ELEVATED FACE TURNER
Well maintained and stored in shed. Has LCD readout control and 6' elevating face. 2007 Vermeer ...
2002 VERMEER HG525TX
Its track-mounted undercarriage helps operators move the grinder around land-clearing sites witho...
2016 VERMEER HG4000
A new clutch and hydraulic pump motor were installed about 200 operating hours ago, giving buyers...
2008 VERMEER HG6000
A few extra parts, serviced, and ready to work. Reduced price (was $299,000) 2008 Vermeer HG600...
2010 VERMEER CT1010X
This sale comes with 2 back up turners as parts. This 2010 is a solid runner. Comes with a boat l...
2012 VOLVO ECR235DL
2012 Volvo ECR235DL Excavator 6,700 hours on a 2012 Volvo ECR235DL — that’s roughly 480 hours pe...
2011 WEST SALEM 3466BHBP
High inertia, fixed hammer grinder. Teco 250 HP 1190 RPM Electric Motor. Features horizontal feed...
2011 WEST SALEM 4260S
Heavy duty Hammermill with 27" X 63" opening, 4 rows of 40 hammers for 1" minus grinding. Direct ...
2011 WEST SALEM 2420B
This is a grinding line with a airlock system and dust control. Starting hopper is a pneumatic sh...
2017 WILDCAT CT616
2017 Wildcat CT616 2017 Wildcat CT616 — 2,100 hours, which is roughly 260 hours per year. That i...
2007 YALE GLP050VX
2007 Yale GLP050VX This 2007 Yale GLP050VX is a 5,000-lb capacity cushion or pneumatic tire fork...
2021 DOPPSTADT Inventhor 9
2021 Doppstadt Inventhor 9 2021 Doppstadt Inventhor 9 — only 860 hours, which is roughly 215 hou...
2011 Tycan 1100 816 3D
Was screening bark. Will have motor and drive assembly. 8'x16' 3 deck screener. Hours: Unknown | Engine Hou...
90's WEST SALEM FEEDER/HOPPER
13'8" tall when assembled, 8'2" transport height, 11'6" wide, 20" long. It's a West Salem Machine...
2020 AIR BURNER S-220
Hours: 230 | Engine: 49HP Hatz | Length: 30'-1" | Width: 8'-6" | Height: 8'-6" | Weight: 36,650 lbs
2020 AIR BURNER S-327
2020 Air Burners S-327 offers unused operating condition without the cost of a current-year unit....
2021 AIR BURNER S119
A self contained above ground Air Curtain Burner (FireBox or air curtain incinerator) with a refr...
2024 AIR BURNER Burn Boss T24
Towable Airburner, like new. Hours: 147 | Engine Hours: 147 | Engine: 12.5HP Diesel | Fuel Tank Capacity: 10...
2018 AIR BURNER T300
One owner machine Hours: 955 | Engine: Cat | Length: 27'-5" | Width: 8'-2" | Height: 7'-4" | Trench Size (L ...
2016 AMERIMULCH COLORTROM 100
Good condition. Ready to work for demos. 2016 Amerimulch Colortrom 100 2016 Amerimulch Colortro...
2009 AMERIMULCH COLORTROM 125
Electric trommel-style mulch coloring machine. This machine is in good working condition. Colored...
2014 AMERIMULCH COLORTROM 250
Stationary Amerimulch Colortrom 250. Equipped with an Amerimulch Marksman System. Designed to ac...
2015 AMERIMULCH COLORTROM 250
Marksman monitoring system. 20yd non-bridging hopper. Conveyor not included, but control panel ha...
2014 AMERIMULCH COLORTROM 125
This unit will do 100 to 125 YPH. Connect 1 1/2" - 2" water line and colorant. Can be ran directl...
2008 AMERIMULCH COLORTROM 250
2nd owner since 2015, great condition, complete color plant, 25 yard hopper, 85' radial stacker, ...
2019 AMERIMULCH COLORTROM
Includes Broadcrown generator (in good shape). Good tires. 2019 Amerimulch Colortrom 2019 Ameri...
2018 ANACONDA TD620
3/8" stainless steel screens. Everything works as it should. Reduced price (was $185,000) 2018 ...
2013 ANACONDA TD516
2013 Anaconda TD516 2013 Anaconda TD516 — only 492 hours, which is roughly 40 hours per year. Th...
2021 ARJES IMPAKTOR 250
New gearbox installed by dealer. All new updates done. Engine warranty till 4/19/23. Wood/MSW sha...
2025 ARJES IMPAKTOR 250
This Arjes 250 comes with star shafts, has a warranty through april 2026 and the engine through a...
2024 ARJES IMPAKTOR 250
Unit comes with 2 standard impaktor shafts installed. Comes with only one set of concrete OR pad...
2021 ARJES 250
2021 Arjes Impaktor 250 2021 Arjes Impaktor 250 — 1,700 hours, which is roughly 425 hours per ye...
2018 ARJES IMPAKTOR 250
Extra shaft. GM 2018 Arjes Impaktor 250 2018 Arjes Impaktor 250 — only 881 hours, which is rou...
2016 ASTEC/KPI-JCI GT104
Ready to work Hours: 484 | Engine Hours: 484 | Engine: Kohler | Length (Working): 35'-1" | Width (Working): 41'
Amadas Bagging Line
Has the hopper, sealer, palletizer, shrink wrapper. Complete line ready to work. Reduce price (w...
Amadas BG01
The machine is a volumetric bagger so the volume of product going in the bags is automated but th...
2020 BANDIT BEAST 3680TK
2020 Bandit Beast 3680TK 1,500 hours on a 2020 Bandit Beast 3680TK — that’s roughly 300 hours pe...
2023 BANDIT BEAST 1680
Excellent condition. Include a few extra parts. Reduce price (was $350,000) 2023 Bandit Beast 1...
2021 BANDIT Beast 2460XP
Excellent condition. Some extra parts. 2021 Bandit Beast 2460XP 618 hours on a 2021 Bandit Beas...
2005 BANDIT BEAST 3680
2005 Bandit Beast 3680 5,900 hours on a 2005 Bandit Beast 3680 — that’s roughly 295 hours per ye...
2022 BANDIT BEAST 2680T
Very good condition. New cutters installed. Service done recently. 32 tooth mill. 2022 Bandit Be...
2021 BANDIT BEAST 2460T
Has a bunch of extra parts that will come with it. In excellent condition. 2021 Bandit Beast 246...
2020 BANDIT BEAST 3680
Only 551.4 run hours and 1,915.9 idle hours. Great Condition. It is a 30 tooth machine. Cutter he...
2024 BANDIT BEAST 2090XP
2024 Bandit Beast 2090XP with kesla loader. Immaculate shape. Comes with wireless remote and swin...
1997 BANDIT BEAST 3680
All reconditioned. Painted and new decals. 1997 Bandit Beast 3680 2,880 hours on a 1997 Bandit ...
2021 BANDIT BEAST 2680
Fully operational. Will need some teeth and cutter bodies replaced. This Bandit has the shingle ...
2001 BECKER UNDERWOOD SECOND HARVESTER
Tub unit weighs 15,000 lbs, the hopper 2,500 lbs, and the conveyor 3,500 lbs. Reduced price (was...
2017 BEYER JC0750
Hours: 1100 | Engine Hours: 1100
2024 BARFORD T516
2024 Barford T516 trommel screen. Ultra low sulfur diesel fuel Equipment-certification code: NC...
2024 BARFORD SR124
2024 Barford SR124 Shaker Screen - 3 way screening plant. Ultra low sulfur diesel fuel Equipmen...
2022 BARFORD SR124
2022 Barford SR124 Shaker Screen. Ultra low sulfur diesel fuel Equipment-certification cod: NCR...
1994 CAT 3412
Comes with factory lift pump and hour meter. Hours are unknown due to original hour meter missin...
2014 CAT 3412
Reduce price (was $65,000) Hours: 325 | Engine Hours: 325 | Engine: CAT 3412 | Length (Generator Set Dimensi...
2022 CBI 5800BT
Great running grinder. Ready to work. 2022 CBI 5800BT 2,400 hours on a 2022 CBI 5800BT — that’s...
2024 CBI 5800BT
The 5800BT is one of CBI's flagship horizontal grinders, known for combining high production, agg...
2006 CBI 6800T - HORIZONTAL GRINDER
New belt drives, new tips & screens, new radiator engine fan & guard, new alternator, new engine ...
2005 CBI High Production Grinding Line
System includes; 4872 grinder, feeder, disc screen, transfer conveyor, radial stacking conveyor, ...
2022 CBI 5800BT
Huge reduce price (was $679,000) 2022 CBI 5800BT 2,242 hours on a 2022 CBI 5800BT — that’s roug...
2019 CBI 80T
Self contained diesel track mounted conveyor. 80' long by 42" wide chevron cleated belt. Operate...
1999 CEC 616
Has a hydraulic grizzly. Aprox. $20,000 in extra parts and screen. Cat power upgrade. Hours: 10,600 | Engine...
2005 CEC 5x12
Adjustable screen, amplitude and speed. Discharge chutes. 30" wide discharge conveyor under bot...
1995 CEC 512
Rebuilt Deutz, runs perfect. 2" top deck 1/2" and 3/8" bottome deck. New tires for transport. Hours: Unknown
2007 CEC 512
Has a ball deck also. Top deck is 1½" and bottom deck is ½". In excellent condition for the age. Hours: 1375
2005 CMI BIOGRIND 400
Approx $25k in new parts/service. New clutch handle, batteries, pressure switch for feed belt rev...
1998 COMPLETE CRUSHING PLANT
This Crushing Plant includes: - A Jaw Crusher - Multiple Cone Crushers - Multiple Conveyors -...
2024 CZ SCREEN MDS MIDI
Has a 1/2" screen in it and comes with an additional 1/4" screen. HB HPR0000Z31T 2024 CZ Screen...
2025 CZ SCREEN MDS MIDI
This is a brand new unit. Has ½ screens in it. Electric, variable speed 4' x 7' collapsible stan...
2019 CZ SCREEN MDS MIDI
Electric, variable speed 4' x 7' collapsible stand trommel. Load height: 8'-11" Load width: 8' ...
2023 CZ SCREEN MDS MIDI
Comes with power cable. (+T15) 2023 CZ Screen MDS MIDI 2023 CZ Screen MDS MIDI — 2,600 hours o...
2022 CZ SCREEN MDS MIDI
Electric, variable speed 4' x 7' collapsible stand trommel. - Load height: 8'-11" - Load width: ...
2014 Cheetah Mulch Colorizer
2014 Cheetah Mulch Colorizer runs excellent and is fully electric with a cummins powering unit. T...
2003 Crushtek ST1010i - Impact Crusher
Hours: 4000 | Engine: Cat
1993 DIAMOND Z 1048
Rebuilt engine (700 hours on it). Strong running grinder. 1993 Diamond Z 1048 Rebuilt engine wi...
2020 DIAMOND Z DZH5500TKT
Includes triple-axel transport dolly, remote control, engine cover, auxiliary hydraulic power uni...
2021 DIAMOND Z DZT8000
Only 2 months old! Put into service Nov 2021. Has remaining warranties from Diamond Z (till Nov 2...
1997 DIAMOND Z 1260
Grinder runs and works great (despite its appearance). Overall straight grinder. 1997 Diamond Z ...
2007 DIAMOND Z 1248
Factory Rebuild with new mill, clutch. Radial stacking conveyor. Tub floor in great condition. Al...
1993 DIAMOND Z PWG-1260
Was purchase new and had very little use over the years. Over $10k worth of extra parts. 1993 Di...
2017 DIAMOND Z DZH4000TK
New turbos. Includes air compressor, magnetic pully, rod puller, two remotes and theather, owners...
2017 DOPPSTADT DW3060K
2017 Doppstadt DW3060K 2017 Doppstadt DW3060K — only 1,000 hours, which is roughly 125 hours per...
2011 DOPPSTADT DW3060
2011 Doppstadt DW3060 2011 Doppstadt DW3060 — 9,382 hours, which is roughly 670 hours per year. ...
2012 DOPPSTADT 5-BAY PICKING STATION
72" x 115' covered 5-bay picking station. 6-piece Engine: VFD Electric
2009 DOPPSTADT AK230
New floor chain and discharge belt. 10" and 3" screen (additional 10" that needs welding). Air br...
2019 DOPPSTADT SM 720 Plus
5/8" punch plate drum, new ERG cooler installed (2024), new heavy duty brushes (2024), new belt f...
2021 DOPPSTADT SM720.2
This SM 720.2 has a 9.5-cubic-yard hopper—about three cubic yards larger than the commonly listed...
1999 Duratech HD12
Good, clean grinder ready to work. Reduced (was $174,900) 1999 Duratech HD12 Estimated 2,500–3...
2002 Duratech HD9
Runs and works, was used to do brush and regrind. Has a list of spare parts and work that has bee...
2017 EDGE MC1400
Hours: 1351 | Engine: Cat C4.4 | Length (Transport): 39'-0" | Width (Transport): 8'-9" | Height (Transport)...
2017 EDGE MC1400
The material classifier allows operators to separate up to four different factions as standard; l...
2019 EDGE TRT622
Excellent condition. California permitted. 2019 EDGE TRT622 2019 EDGE TRT622 — only 890 hours, ...
2018 EDGE MS50
Very good, ready to use conveyor. Hours: Unknown | Engine Hours: Unknown | Engine: Hydraulic
ERIEZ 39" CROSS MAGNET
Like new Engine: Electric
2022 EVORTLE SR2512
A 2022 Evortle SR2512 with just 210 hours — that’s about 100 hours per year. Light use on a compa...
1998 EXPRESS BLOWER EB30
30yd mulch blower on Ford Chassis. Walking floor style feed. Cat power unit powering blower. Blow...
2005 EXPRESS BLOWER EB40
2003 Freightliner FL80 with a Caterpillar diesel engine and a 10-speed Eaton transmission, Model ...
2020 EXPRESS BLOWER EB60
Hours: 7688 | Engine Hours: 7688 | Engine: Paccar | Truck Miles: 108,257
2007 EXTEC X44
Good condition, ready to work. Hours: 4500 | Engine Hours: 4500 | Engine: 250HP Cat | Length (Working): 47'-9"
1995 EXTEC 5000
Will come with approx...14 extra screen panels. Hours: 6676 | Engine Hours: 6676 | Engine: 125HP Deutz
2007 EXTEC X44
Serviced with new liners and all new fluids Hours: 3432 | Engine: Cat | Length (Working): 47'-9" | Width (Wo...
2010 EXTEC C12
Includes new jaw dies and check plates. HPR000Z197T0H Hours: 3100 | Engine: Cat C9 | Length (Working): 46'-3"
2004 Eagle 1000
Machine is sitting for 4 years. Hours: Unknown | Engine Hours: Unknown | Engine: 375HP Detroit
2018 Ecostack 8036
Ecostack 80'36" conveyor on tracks. Runs great. Hours: 5000 | Engine Hours: 5000 | Engine: CAT | Weight: 28,...
2021 Ecostack 8048K
Hours: 5500 | Engine Hours: 5500 | Engine: 130HP CAT 4.4 | Length (Working): 80'-0" | Belt Width: 48"
2003 Erin 350A
Erin Star screen model 350A. Used to screen wood fiber. Cleaning system removed but will go with ...
2000 FECON BMD1000
Batch colorizer trailer, ready to work. Self contained diesel. 6 yard hopper. Efficient water use...
1997 FECON MZA3250
Was running without rear discharge prior (the bed has been reinstalled, but not the chain). Inclu...
2004 FECON CM2000
Self contained mulch colorizer, ready to work. 5 yard hopper, 150-200 yard per hour production ca...
2007 FINN BB302
Includes hose (not pictured), runs great. Hours: 1000 | Engine: Kubota
2000 FREIGHTLINER FL-112 EB60
Runs great, brand new $11,000 control box. Hours: Unknown | Engine Hours: Unknown | Engine: CAT C-10 | Mile...
2000 Finlay 790
Engine rebuilt 2019. Bought machine August 2018. Has 3/8" screen on it. Half are Stainless steel....
2020 TEREX FINLAY J1160
・Engine: Cat C7.1 (284 hp) ・Inlet width: 40” ・Inlet gape: 24” ・Length: 51’-6” ・Width: 8’-6” ...
2003 Freightliner/Rexius EB60
Factory refurbished in January 2023. Feeder and PTO are 95%, 200 feet of hose (at 50%). Belt floo...
2007 Freightliner/Rexius EB60
Newer style reversable floor. Feeder at 90%. Pumps and PTO in good condition. Reduced price (was...
1990 HAYBUSTER IG8 - TUB GRINDER
1990 Haybuster IG8 1990 Haybuster IG8 — a tub grinder built for simple, reliable grinding in agr...
2008 Highway Fuels 40CY
Low mileage Highway Fuels 40cy Blower Truck on Peterbuilt chassis, automatic truck. Truck is in g...
1993 Hogzilla TC-1464P
Good working condition. Downsizing operation, engine and torque converter 6 years old, entra engi...
2007 Hogzilla HTC 1464T
Out frame rebuild on engine. Well maintained and ready to grind. 2007 Hogzilla HTC 1464T 3,425 ...
2011 John Deere 5101E
EROPS, A/C & Heat, Radio, Cab shuttle lift, 540PTO, CAT-2, 3-pt hitch, 2 sets of remotes, H240 lo...
2007 KEESTRACK FRONTIER/K6
Ready to work, lots of extra screens. Both track seals leaking, overs conveyor belt needs patched...
2012 KIVERCO MPS 1200
A 2012 Kiverco MPS 1200 with 1,000 hours — that’s about 70 hours per year. Low use for a picking ...
2021 KLEEMANN MS21Z
Comes with 3" punch plate (top deck) Reduce price (was $179,900) Hours: 1888 | Engine Hours: 1888 | Engine:...
2023 KOMPLET JC503
Low, original hours (owner quickly needed a bigger machine). Hours: 533 | Engine: 25HP Kubota | Length (Work...
2012 Komptech Cribus 2800 E
Has 5'x16' drum with 1/2" bunch plate. Perkins engine with 59KVA generator. Very good condition, ...
2015 KOMPTECH Crambo 5000
Brand new shaft/couplers. Extra set of belts. 2 sets of knives, holders, and bolts. 2015 Komptec...
2023 KOMPTECH Primus
Equipped with a Tier 4 Final engine. Capable of processing up to 100 yards per hour. Includes a 2...
2012 KOMPTECH HURRIKAN
Reduced price (was $60,000) Hours: 3800 | Engine Hours: 3800 | Engine: Perkins | Length (Transport): 27'-3"
2017 KOMPTECH 3000 STONEFEX
Excellent condition. Includes 48HP/24kw diesel genset. Hours: 674 | Engine Hours: 674 | Engine: Electric (+ ...
2019 KOMPTECH CRAMBO 6000
Reduced price (was $375,900) 2019 Komptech Crambo 6000 2019 Komptech Crambo 6000 — 3,613 hours,...
2017 KOMPTECH CRAMBO 6000
2017 Komptech Crambo 6000 2017 Komptech Crambo 6000 — 5,255 hours, which is roughly 650 hours pe...
2014 KOMPTECH CRAMBO 6000
New heavy-duty shaft replaced in the last year. Several screens come with it. Good, maintained sh...
2018 KOMPTECH TOPTURN X63
New paddles. Excellent condition. Ready to work. 2018 Komptech Topturn X63 2018 Komptech Toptur...
2014 KOMPTECH Hurrikan S
Very nice condition. Pressure-suction system very effective at removing light materials from scre...
2012 KOMPTECH MULTISTAR L2
Fine screen, 1/8" to 1-1/4" product size. Refurbished screen deck 2017. Chains, sprockets. star d...
2020 KOMPTECH MULTISTAR XL3
Very nice well maintained screener. Hours: 4600 | Engine Hours: 4600 | Engine: Perkins/Electric | Hopper Vol...
2009 KPI FT4250
Complete reconditioned, new main conveyor belt, new discharge belt, new hoses to drive motor and ...
2018 Komatsu WA470-8
Automatic reversible fan Wet multi disc brakes Autolube system 26.5-R25 Tires L3 On board sca...
2021 M&J 4000M
Outside of the frame was reinforced with angle iron and painted as factory recall. Has aggressive...
MASTERSKREEN SURVEYOR
New parts to mount pump are on the machine. Engine: Deutz 3cl diesel
2017 MCCLOSKEY J45
4397 crushing hours Reduced price (was $284,900) Hours: 6216 | Engine Hours: 6216 | Engine: 350HP Volvo
2023 MCCLOSKEY R155
Like new condition. Hours: 37 | Engine: Cat | Length (Transport): 50'-2" | Width (Transport): 9'-6" | Height...
2023 MCCLOSKEY I4CR
Very nice condition. New blow bars. Closed circuit. Reduce price (was $649,000) Hours: 1384 | Engine Hours:...
2016 MCCLOSKEY R155
1" and 3/8" screens. Clean and well maintained Hours: 4100 | Engine: Cat | Length (Transport): 50'-2" | Widt...