Menu
Sold
2019 ACTION Vibra-Snap
35' long, 8' wide shaker screen. 4 screen sizes installed: One third is 1/2", one third is 3/4", ...
2024 AIR BURNER Burn Boss T24
Towable Airburner, like new. Hours: 147 | Engine Hours: 147 | Engine: 12.5HP Diesel
2020 AIR BURNER S-220
Hours: 230 | Engine: 49HP Hatz | Length: 30'-1" | Width: 8'-6" | Height: 8'-6" | Weight: 36,650 lbs
2018 AIR BURNER T300
One owner machine Hours: 955 | Engine: Cat
2021 AIR BURNER S119
A self contained above ground Air Curtain Burner (FireBox or air curtain incinerator) with a refr...
Amadas Bagging Line
Has the hopper, sealer, palletizer, shrink wrapper. Complete line ready to work. Reduce price (w...
2016 AMERIMULCH COLORTROM 100
Good condition. Ready to work for demos. Hours: 3511 | Engine: Electric
2008 AMERIMULCH COLORTROM 250
2nd owner since 2015, great condition, complete color plant, 25 yard hopper, 85' radial stacker, ...
2019 AMERIMULCH COLORTROM
Includes Broadcrown generator (in good shape). Good tires. Hours: 779 | Engine Hours: 779 | Engine: John Dee...
2015 AMERIMULCH COLORTROM 250
Marksman monitoring system. 20yd non-bridging hopper. Conveyor not included, but control panel ha...
2014 AMERIMULCH COLORTROM 125
This unit will do 100 to 125 YPH. Connect 1 1/2" - 2" water line and colorant. Hours: Unknown | Engine Hours...
2013 ANACONDA TD516
Hours: 492 | Engine Hours: 492 | Engine: JCB | Length (Transport): 38'-1" | Width (Transport): 7'-8" | Heig...
2018 ANACONDA TD620
3/8" stainless steel screens. Everything works as it should. Reduced price (was $185,000) Hours: 2600
2021 ARJES IMPAKTOR 250
New gearbox installed by dealer. All new updates done. Engine warranty till 4/19/23. Wood/MSW sha...
2019 ARJES IMPAKTOR 250
Machine is in good shape overall. Starts and sounds good, belt raise and lower properly, has norm...
2018 ARJES IMPAKTOR 250
2 sets of shafts (1 for C&D, 1 for wood) Hours: 998 | Engine: Volvo
2025 ARJES IMPAKTOR 250
This Arjes 250 comes with star shafts, has a warranty through april 2026 and the engine through a...
2018 ARJES IMPAKTOR 250
Extra shaft. GM Hours: 881 | Engine Hours: 881 | Engine: Volvo
2021 ARJES 250
With extra set of shafts and screens. Hours: 1700 | Engine Hours: 1700 | Length: 22' | Width: 7'-10.5"
2016 ASTEC/KPI-JCI GT104
Ready to work Hours: 484 | Engine Hours: 484 | Engine: Kohler | Length (Working): 35'-1" | Width (Working): 41'
2017 BACKHUS A55
Great shape, ready to work. Hours: 2119 | Engine: 320HP Volvo
2015 BACKHUS 21.55 - STRADDLE TYPE
Good condition. Ready to work. Reduced price (was $275,000) Hours: 3080 | Engine: Cummins QSL8.9
2000 BANDIT BEAST 3680
Upgraded to Cat engine. New clutch, ECM, hydraulic components, feed table, and remote! Runs and w...
2023 BANDIT 1425
Includes magnetic head pulley, coloring system, and 1-1/2" screen Hours: 21 | Engine: 120HP Cat
2021 BANDIT Beast 2460XP
Excellent condition. Some extra parts. Hours: 618 | Engine Hours: 618 | Engine: CAT C13 536HP
1999 BANDIT BEAST 3680
Extra parts, Optional Color Critter colorizer. Hours: 1582 | Engine: 525HP John Deere
2020 BANDIT BEAST 3680TK
Hours: 1500 | Engine: 875HP Cat C27
2021 BANDIT BEAST 2460T
Has a bunch of extra parts that will come with it. In excellent condition. Hours: 750 | Engine Hours: 750
1997 BANDIT BEAST 3680
All reconditioned. Painted and new decals. Engine Hours: 2880 | Engine: 350HP Cat
BECKER UNDERWOOD SECOND HARVESTER 200
Cummins 4BT diesel, 115 cu.ft. capacity (approx 4-1/2 yd). Reduced price (was 39,000) Hours : 5151
2001 BECKER UNDERWOOD SECOND HARVESTER
Tub unit weighs 15,000 lbs, the hopper 2,500 lbs, and the conveyor 3,500 lbs. Reduced price (was...
BETTER BE3660C
36" x 60'. New motor in March 2023. Frame is in good condition and the majority of rollers have b...
2018 Better 60x36
60' x 36" radial stacking conveyor. Runs great when parked. Hours: 300 | Engine: 10HP Electric
BETTER BE3660C
Solid running conveyor. Some damage to the wind canopy. Engine: 15HP Electric Nord 3-Phase
2017 BEYER BM2010R3 - SHAKER SCREEN
Never used machine! 2" top square cloth screen and 1-1/2" square cloth on bottom screen. Includes...
2016 BEYER JC0535TH
Great shape, ready to work. Was used by a concrete company to crush broken pieces from molds. UY...
2017 BEYER JC0750
Hours: 1100 | Engine Hours: 1100
1997 BLO-TECH/FREIGHTLINER BT40/FL80
Automatic transmission. New pusher wall (floor, sides, and feeder all 70% or better). Pusher cyli...
1994 CAT 3412
Comes with factory lift pump and hour meter. Hours are unknown due to original hour meter missin...
1998 CBI MAGNUM FORCE 4800 - HORIZONTAL GRINDER
Fair running machine. Reduced Price: was $179,000 DB Engine: Cat 3412
2002 CBI 4000
Reduced price (was $178,900) Engine: 1000HP Cat
2022 CBI 5800BT
Great running grinder. Ready to work. Hours: 2400 | Engine Hours: 2400 | Engine: 765HP Scania
2006 CBI 6800T - HORIZONTAL GRINDER
New belt drives, new tips & screens, new radiator engine fan & guard, new alternator, new engine ...
1995 CEC 512
Rebuilt Deutz, runs perfect. 2" top deck 1/2" and 3/8" bottome deck. New tires for transport. Hours: Unknown
2005 CEC 5x12
Adjustable screen, amplitude and speed. Discharge chutes. 30" wide discharge conveyor under bot...
1999 CEC 616
Has a hydraulic grizzly. Aprox. $20,000 in extra parts and screen. Cat power upgrade. Hours: 10,600 | Engine...
2006 CEC 512 - SHAKER SCREEN
New engine, new tires. Ball deck. Very nice and ready to work. Reduced price (was $96,000) Engine Hours: 566
2010 CHEETAH MULCH COLORIZER
Can do approx 150 yards per hour.
2024 CHICKEN Rooster
fresh baked! goes well with honey mustard! Hours: 10 | Engine Hours: 10 | Engine: Corn
CMI BIOGRIND 260 - HORIZONTAL GRINDER
Replacement engine in machine, but not fully installed (original went out). Sold as-is XB Engine: 260HP Cum...
2005 CMI BIOGRIND 400
Approx $25k in new parts/service. New clutch handle, batteries, pressure switch for feed belt rev...
2013 Colorbiotics Second Harvester 200
New liner, blades, and new upgraded gear box. Very well taken care of. (Conveyor pictured is NOT...
COLORBIOTICS SECOND HARVESTER
Wet color machine and conveyor. Conveyor functional, but rough. Overall condition is good. HB Engine: 25HP ...
1998 COMPLETE CRUSHING PLANT
This Crushing Plant includes: - A Jaw Crusher - Multiple Cone Crushers - Multiple Conveyors -...
2022 CONNECT CH120
Only used 2 hours. Auto Lube system. Quick coupler fit on Doosan DX180LC HPR0000Z36T8H - NO Hours: 2
2003 Crushtek ST1010i - Impact Crusher
Hours: 4000 | Engine: Cat
2018 CUSTOM HORIZONTAL BALER
Custom made electric horizontal baler. 6' x 6' hopper. Can do up to approx 50 tons per day. Redu...
CUSTOM 13YD MIXER
Electric (3-phase) batch mixer for coloring mulch or custom blends. No wear to drum or flights. C...
CUSTOM INDUSTRIAL 2-SHAFT SHREDDER
Clean, 2-shaft 42" x 24" shredder Engine: 15HP Electric
2023 CZ SCREEN MDS MIDI
Comes with power cable. (+T15) Hours: 15 | Engine: Electric | Weight: 2,645 lbs
2024 CZ SCREEN MDS MIDI
Has a 1/2" screen in it and comes with an additional 1/4" screen. HB HPR0000Z31T Hours: 5 | Engine Hours: 5
2020 CZ SCREEN MDS MIDI
Only used 5 hours. 1/2" screens. Still in "new condition". Has all parts and generator (Honda) to...
2017 DIAMOND Z DZH4000TK
New turbos. Includes air compressor, magnetic pully, rod puller, two remotes and theather, owners...
1997 DIAMOND Z 1463 - TUB GRINDER
Some extra parts included. Optional extra electric motor (identical to one installed), $20,000 ...
2007 DIAMOND Z 1248
Factory Rebuild with new mill, clutch. Radial stacking conveyor. Tub floor in great condition. Al...
1997 DIAMOND Z 1260
Grinder runs and works great (despite its appearance). Overall straight grinder. Hours: 5840 | Engine: 860HP...
1993 DIAMOND Z PWG-1260
Was purchase new and had very little use over the years. Over $10k worth of extra parts. Hours: 2250 | Engin...
1994 DIAMOND Z 1260
New clutch, omegas, and phase 1 conveyor. Great grinder for re-grind. Hours: 8800 | Engine: 850HP Cat 3412
2020 DIAMOND Z DZH5500TKT
Includes triple-axel transport dolly, remote control, engine cover, auxiliary hydraulic power uni...
2021 DIAMOND Z DZT8000
Only 2 months old! Put into service Nov 2021. Has remaining warranties from Diamond Z (till Nov 2...
1993 DIAMOND Z 1048
Rebuilt engine (700 hours on it). Strong running grinder. Engine Hours: 700 (on rebuild) | Engine: 500HP Cat
2011 DOPPSTADT AK530
Reduced Price (was $375,900) PI Hours : 1700 | Engine: 510HP Mercedes
2012 DOPPSTADT 5-BAY PICKING STATION
72" x 115' covered 5-bay picking station. 6-piece Engine: VFD Electric
2011 DOPPSTADT DW3060
Well maintained shredder. Oil sample was taken in October 2025. Hours: 9,382 | Engine Hours: 9,382 | Engine:...
2009 DOPPSTADT AK230
New floor chain and discharge belt. 10" and 3" screen (additional 10" that needs welding). Air br...
2015 DOPPSTADT DW3060K BIOPOWER
Hours: 2765 | Engine: 490HP Mercedes
2017 DOPPSTADT DW3060K
Reduced price (was $229,900) Hours: 3669 | Engine: 450HP Mercedes
2019 DOPPSTADT SM 720 Plus
5/8" punch plate drum, new ERG cooler installed (2024), new heavy duty brushes (2024), new belt f...
2018 DOPPSTADT SM720K
Reduced price (was $270,000) Hours: 856 | Engine: 114HP Deutz
2011 DOPPSTADT DW3060
Many extra parts. All belts have less then 500 hours on them. Was used for wood waste. Very well ...
2006 DOPPSTADT DW3060SA
Runs well and is used daily Hours: 9079 | Engine: 500HP Mercedes
2007 DOPPSTADT SM720K
Includes 3/4" punch plate drum and 3/8" stainless steel mesh drum. 7' diameter, 20' long drums. R...
2017 DOPPSTADT DW3060K
Excellent condition. Hours: 1000 | Engine Hours: 1000 | Engine: 435HP Mercedes
2004 DURATECH 3010
Many upgrades including new remote. Good running machine. Was running nursery redwood boxes mostl...
1999 Duratech HD12
Good, clean grinder ready to work. Reduced (was $174,900) Hours: 2500-3000 est | Engine: 650HP Cat 3412
1994 DURATECH HD10 - TUB GRINDER
Engine: Cat
2005 DURATECH 3010 - TUB GRINDER
Approx $20k in spare parts. Ready to work. Well maintained. Reduced price (was $219,900) Hours: 3800 | Engi...
2004 Eagle 1000
Machine is sitting for 4 years. Hours: Unknown | Engine Hours: Unknown | Engine: 375HP Detroit
EAGLE 1400-45 - IMPACT CRUSHER
New engine (3000 hours), clutch, rotor, and discharge belts. Engine Hours: 3000 | Engine: 750HP Cummins K-19
1998 EARTHSAVER 515H
Includes colorizing system Hours: 3224 | Engine: 80HP Cummins
2021 Ecostack 8048K
Hours: 5500 | Engine Hours: 5500 | Engine: 130HP CAT 4.4
2018 ECOSTACK 8036K
Reduced price (was $95,000) Hours: 819 | Engine: 60HP Cat C2.2
2017 EDGE MC1400
Hours: 1351 | Engine: Cat C4.4
2016 EDGE TS65
Includes belt scale. Excellent condition DB Hours : 1094 | Engine: 50HP Cat
2018 EDGE MS50
Very good, ready to use conveyor. Hours: Unknown | Engine Hours: Unknown | Engine: Hydraulic
2016 EDGE SLAYER XL
Like new DB Hours : 152 | Engine: Cat C9
2019 EDGE TRT622
Excellent condition. California permitted. Hours: 809 | Engine Hours: 809 | Engine: 130HP CAT 4.4
2015 EDGE SLAYER XL
Reduced price (was $298,000) Engine Hours: 1537 | Shredder Hours: 1207 | Engine: 350HP Cat (Tier III)
ERIEZ 39" CROSS MAGNET
Like new Engine: Electric
2003 Erin 350A
Erin Star screen model 350A. Used to screen wood fiber. Cleaning system removed but will go with ...
2022 EVORTLE CT850
Cross magnet. Ready to work. Reduced price (was $325,000) Hours: 627 | Engine: 150HP Cat | Length (Transpor...
2019 EVORTLE CT535
Hours: 175 | Engine: 74HP Hatz Diesel | Length (Transport): 18'-9" | Width (Transport): 7'-1" | Height (Tra...
2020 EXPRESS BLOWER EB60
Hours: 7688 | Engine Hours: 7688 | Engine: Paccar | Truck Miles: 108,257
2005 EXPRESS BLOWER EB40
2003 Freightliner FL80 with a Caterpillar diesel engine and a 10-speed Eaton transmission, Model ...
2003 EXPRESS BLOWER EB40
Includes 200" of 4" hose. Maintenance records available (Truck is a Freightliner FL80) Reduced ...
1998 EXPRESS BLOWER EB30
30yd mulch blower on Ford Chassis. Walking floor style feed. Cat power unit powering blower. Blow...
2004 EXPRESS BLOWER/KENWORTH EB70/T800
New fuel pump, new pto pump, new blower motor, approx $25k worth of regular/preventative maintena...
2007 EXTEC X44
Serviced with new liners and all new fluids Hours: 3432 | Engine: Cat | Length (Working): 47'-9" | Width (Wo...
2010 EXTEC C12
Includes new jaw dies and check plates. HPR000Z197T0H Hours: 3100 | Engine: Cat C9 | Length (Working): 46'-3"
2008 EXTEC E7
New engine, new gear box for drive feeder. Clean plant. Engine Hours: 100 | Engine: Deutz
2007 EXTEC X44
Good condition, ready to work. Hours: 4500 | Engine Hours: 4500 | Engine: 250HP Cat | Length (Working): 47'-9"
2000 FECON BMD1000
Batch colorizer trailer, ready to work. Self contained diesel. 6 yard hopper. Efficient water use...
1997 FECON MZA3250
Was running without rear discharge prior (the bed has been reinstalled, but not the chain). Inclu...
2019 FINLAY 883+
16' x 5' top and bottom decks. Fixed hopper, plate steel pan feeder with heavy duty chain drive. Hours: 238
2007 FINN BB1208 (on 2019 Chevy 5500)
2007 Finn mounted on 2019 Chevy 5500 truck with 6.7 Duramax Hours: 7514
2007 FINN BB302
Includes hose (not pictured), runs great. Hours: 1000 | Engine: Kubota
2000 FREIGHTLINER FL-112 EB60
Runs great, brand new $11,000 control box. Hours: Unknown | Engine Hours: Unknown | Engine: CAT C-10 | Mile...
2003 Freightliner/Rexius EB60
Factory refurbished in January 2023. Feeder and PTO are 95%, 200 feet of hose (at 50%). Belt floo...
2007 Freightliner/Rexius EB60
Newer style reversable floor. Feeder at 90%. Pumps and PTO in good condition. Reduced price (was...
NEW GCS COLOR COMPACT C2 - MULCH COLORIZER
The compact coloring solution for small/medium producers. Designed to be fed by a skidsteer. - 5...
2020 GCS PPRC 30x60
All rollers updated. Belt and bottom pulley have some damage, but still work with no issues. Engine: 10HP El...
2015 GCS PPRC 30x60
All rollers updated. Belt is in good condition. Engine: 15HP Electirc
1995 GMC ACL
100' boom, 2,500 lb winch, 9-speed transmission NE Milage: 126,580 | Engine: Cat 3306 diesel
2019 HAAS TYRON 2000XL
Entire shredding chamber rebuilt. Limited warranty through July 2021 Can handle; wood waste, C&D...
1990 HAYBUSTER 1100
Grinder runs very well. Engine: 300HP Cat 3306
1990 HAYBUSTER IG8 - TUB GRINDER
New clutch & tires. Reduced price (was $28,000). Engine: John Deere
1999 HCL 10FT
Engine: N/A (PTO driven)
2008 Highway Fuels 40CY
Low mileage Highway Fuels 40cy Blower Truck on Peterbuilt chassis, automatic truck. Truck is in g...
2013 JD CONVEYORS 3100 Sorting System
Complete Sorting System including the following equipment: Incline Feed Conveyor - 5HP (3/60/57...
2011 John Deere 5101E
EROPS, A/C & Heat, Radio, Cab shuttle lift, 540PTO, CAT-2, 3-pt hitch, 2 sets of remotes, H240 lo...
2016 John Deere 644K
Very good condition and ready to work! Includes standard bucket. Quick coupler, 3rd valve, window...
2008 KEESTRACK COMBO
3" punch plate Hours: 3138
2007 KEESTRACK FRONTIER/K6
Ready to work, lots of extra screens. Both track seals leaking, overs conveyor belt needs patched...
2003 KENWORTH T800B
2 remotes. Multi material spreader truck. Great condition. Milage: 194000
2002 Kenworth T800
2002 Kenworth T800 60 yard express blower truck. Well maintained. Rebuilt door December 2023, new...
KIVERCO 1200 MPS
New engine (789 hours). Very good condition. Engine Hours: 789 | Engine: John Deere 3029T
2023 KOMPLET JC503
Low, original hours (owner quickly needed a bigger machine). Hours: 533 | Engine: 25HP Kubota | Length (Work...
2019 KOMPTECH CRAMBO 6000
Reduced price (was $375,900) Hours: 3613 | Engine Hours: 3613 | Engine: 447HP Cat
2017 KOMPTECH 3000 STONEFEX
Excellent condition. Includes 48HP/24kw diesel genset. Hours: 674 | Engine Hours: 674 | Engine: Electric (+ ...
2012 KOMPTECH HURRIKAN
Reduced price (was $60,000) Hours: 3800 | Engine Hours: 3800 | Engine: Perkins
2012 KOMPTECH MULTISTAR L2
Fine screen, 1/8" to 1-1/4" product size. Refurbished screen deck 2017. Chains, sprockets. star d...
2018 KOMPTECH TOPTURN X63
New paddles. Excellent condition. Ready to work. Hours: 1378 | Engine: Cat C13
2023 KOMPTECH Primus
Equipped with a Tier 4 Final engine. Capable of processing up to 100 yards per hour. Includes a 2...
2009 KOMPTECH TERMINATOR 5000S
Includes cross belt magnet. Track mounted chassis. Reduced Price (was $379,000 ) PI Hours : 1055 | Engine:...
2014 KOMPTECH Hurrikan S
Very nice condition. Pressure-suction system very effective at removing light materials from scre...
2012 Komptech Cribus 2800 E
Has 5'x16' drum with 1/2" bunch plate. Perkins engine with 59KVA generator. Very good condition, ...
2015 KOMPTECH Crambo 5000
Brand new shaft/couplers. Extra set of belts. 2 sets of knives, holders, and bolts. Hours: 3500 | Engine Hou...
2014 KOMPTECH CRAMBO 6000
New belt, new cutting edge, and new 12" screen. Comes with approx 20 teeth/knives, set of fingers...
2023 LENCO ROCK PICKER
7-1/2 ft wide, pull beind rock picker. HPR0000Z97T5H50 - NO Engine: N/A (Hydraulic)
2010 MANITOU MLT940L-120LSU
OK Hours : 2808 | Engine: 123HP Perkins
20-Piece Screening System
This is a 6-product screening system. All equipment in it is from the mid-2000s other than the Su...
MASTERSKREEN SURVEYOR
New parts to mount pump are on the machine. Engine: Deutz 3cl diesel
2021 MCCLOSKEY R230
Ready to work. Runs and works like it should. Reduced price (was $319,900) Hours: 4664 | Engine Hours: 4664
2023 MCCLOSKEY R155
Like new condition. Hours: 37 | Engine: Cat | Length (Transport): 50'-2" | Width (Transport): 9'-6" | Height...
2021 MCCLOSKEY 512R
1-1/4" screens installed, 1-1/2" screens also included. Remote control. Hours: 200 | Engine: Cat
2017 MCCLOSKEY J45
4397 crushing hours Reduced price (was $284,900) Hours: 6216 | Engine Hours: 6216 | Engine: 350HP Volvo
2018 MCCLOSKEY i44v3
Ready to work Reduced price (was $322,000) Hours: 2826 | Length (Transport): 51'-4.9" | Width (Transport): ...
2007 MCCLOSKEY 733
New rollers, belts, and other parts. Rebuilt engine. Hours: 6300 | Engine Hours: 50 | Engine: 225HP CAT C6 (...
2008 MCCLOSKEY 733RE
Inspected by McCloskey. Needs 2 return idlers and a few screen panels. Belt wipe bent. Hydraulics...
2014 MCCLOSKEY 716
Stationary, 7' drum with 1" punch plate. Hours : 1000 | Engine: Electric (575v 50hz Canadian)
2016 MCCLOSKEY R155
1" and 3/8" screens. Clean and well maintained Hours: 4100 | Engine: Cat | Length (Transport): 50'-2" | Widt...
2023 MCCLOSKEY R155
Like new condition. Hours: 23.1 | Engine: Cat | Length (Transport): 50'-2" | Width (Transport): 9'-6" | Heig...
2017 MCCLOSKEY 516
New brushes (May 2022) and extra belts (for radial and overs conveyors). Very clean, great condit...
2005 MCCLOSKEY 621RE
3/8" screens in drum. Many parts replaced as needed. Hours: 10000 | Engine: Cat
2003 MCCLOSKEY 621
1/2" screens installed Hours: 1100 | Engine: 135HP Perkins 4A35003
MCCLOSKEY 612
There is not a hour meter or a vin plate on it that we can find needs TLC, the motor that spin th...
2019 Metso LT106
In mint-condiction. Hours: 3,539 | Engine Hours: 3,539 | Engine: Cat | Length (Transport): 49'-9" | Width (T...
2004 Metso 11-10S - IMPACT CRUSHER
New set of blow bars, replaced crusher drive, jack shaft and shaft bearings. Nice closed circuit ...
2023 MGL 836X
Very nice 80' x 36" conveyor with little use. Hours: 250 | Engine Hours: 250 | Engine: 56HP Kohler
2017 MGL 7436
36" x 74' self-contained conveyor Hours: 1578 | Engine: 85HP Kubota V3600-T
1978 MITTS & MERILL 13CSD
5' feed hopper (not seen in photos) with two 20" x 18" openings. 3/4" screen on bottom with 6" ai...
2021 M&J 4000M
Outside of the frame was reinforced with angle iron and painted as factory recall. Has aggressive...
2005 Morbark 1300WCL
Runs and operates Hours: 13,943 | Engine: Cat
1999 MORBARK 1300 - TUB GRINDER
Includes 11 screens! (3 - diamond 2" x 2", 2 - circle 2", 2 - circle 1-1/8", 2 - rectangle 6-1/2"...
2006 MORBARK 3600
Rebuilt torque limiter. Remote. 3" screens. Wheel mounted, pintle hitch. Runs great. Everything w...
1997 MORBARK PT837
3/8" screens. Practically rebuilt; replaced all rusted metal for frames, hoppers, conveyors, and ...
2009 MORBARK 4600
New torque hub, new engine at 13,540 hrs, new mill bearings in 2021, new clutch in 2020. Grinder ...
2000 MORBARK PT-737D
Unit rarely used in mulch operation with only 900 hours on this machine. Engine starts right up. Hours: 900
1994 MORBARK 1000
Has a remote. Hours: Unknown | Engine Hours: Unknown | Engine: 350HP Cat
1998 MORBARK PT737
Both main hydraulic pumps rebuilt since 2015. New infeed belt and rollers, new discharge belt and...
2004 MORBARK P4000
2004 Morbark P4000 mulch coloring machine. 5 yard hopper, top augers and bottom augers. Good belt...
2021 MORBARK 3000XT
Hours: 240 | Engine: 575HP Cat C13
1995 MORBARK 1300
Newer clutch and lots of extra parts. Will need a little maintenance since it's been sitting, but...
2012 MORBARK 4600XL
New hammers and rods. Replaced wear plates in mill area. Well maintained. Hours: 3600 | Engine Hours: 3600
1992 MORBARK 1100WCL
New clutch and auger. Rebuilt tub motor, new filters, oil, exhaust manifold gaskets & studs. Hours: 3710
2002 MORBARK 1300 - TUB GRINDER
New, complete rebuild (approx $125k). Some extra parts. Well maintained. Engine Hours: 211 | Engine: 1000HP Cat
2021 MORBARK 6400XT
All new hammers. Remaining Cat Platinum warranty (5yr or 8000 hours). Extra parts. 42" x 61" mill...
2000 MORBARK 1300
Rebuilt engine (with 3475 hours). Well maintained and ready to go. Engine Hours: 3475 (on rebuild) | Engine:...
2022 MORBARK 3400XT
Comes with a warranty. Hours: 1510 | Engine Hours: 1510 | Engine: 800HP Cat C18
2006 MORBARK 6600 - HORIZONTAL GRINDER
New engine at 18,884 hrs, new torque hub at 21,500 hrs. New mill bearings in 2021, new clutch in ...
2005 MORBARK 6600 - HORIZONTAL GRINDER
New engine at 12,000 hrs, new clutch cooupler at 17,498 hrs, new torque hub at 17,300, new inject...
1994 MORBARK 1000
Fully rebuilt mill less then 300 hours ago. Also a few hydraulic motors have been rebuilt. Hours: Unknown
1997 MORBARK 1100
Nice running grinder. Hours: Unknown | Engine Hours: Unknown | Engine: 550HP CAT
2019 MORBARK 6400XT
Very good condition. Ready to work. Oil samplesby Cat done regularly and comes with extra parts Hours: 4000
2014 MORBARK 1000
189 actual frame hours (engine actually less). Orginal engine failed at approx 125 hours and Cat ...
2010 MORBARK 4600
Rebuilt engine and clutch. New discharge and belly belts. Infeed and mill redone at approx 13k ho...
1992 MORBARK 1200
Machine runs and operates well. Mill completely rebuilt by a Morbark dealer. The old mill and re...
2007 MORBARK 1300B
Hours: Unknown | Engine Hours: Unknown | Engine: 1000HP CAT 3412
2015 MORBARK 1300
Has two new tub drive motors, augers have approx. 2,000 hours. New mill shaft 1500 hrs. New Flex ...
1992 MORBARK 1100
Motor replaced approximately in 2012. Tub and general condition of the machine is good. All hydra...
2004 MORBARK 1300
Reduced Price (was $149,900) Engine: 860HP Cat | Engine Hours: 1000 (on rebuild)
2017 MORBARK 1300B
Very well maintained grinder. Some extra parts. Reduce price (was $358,000) Hours: 6500 | Engine Hours: 6500
2003 MORBARK IG5202I Hydraulic Transmission
Twin Disc hydraulic transmission from a 2003 Morbark 1300. Includes both pumps. Removed late 2008...
2001 MORBARK 1300NCL
Newer hammers, fresh paint, tons of new parts, runs great, no leaks. Hours: 8563 | Engine Hours: 8563 | Engi...
2004 MORBARK 3600 - HORIZONTAL GRINDER
Magnet, remote. Very nice, well maintained grinder. Reduced price (was $229,000) DB Hours : 4862 | Engine:...
1994 MORBARK 1200
New Cat (remanufactured) engine with less than 200 hours on it. New bearings, multiple screens, a...
2014 MORBARK 40/36
3 extra sets of knives. Excellent Condition, ready to work. Reduced price (was $315,000) Hours : 2630
2001 MORBARK 5600
Rebuilt engine Hours: 4500 | Engine Hours: 1100 (on rebuild) | Engine: 860HP Cat (rebuilt)
2012 MORBARK 3800XL
Nice grinder, ready to work. Hours: 5940 | Engine: 800HP Cat
2007 MORBARK 4600XL
New conveyor belt, pump motor and a new remote. Reduce price (was $215,000) Hours: 9349 | Engine Hours: 9349
2006 MORBARK 3600
4 new tires. Changed from pintle hitch to fifth wheel. Serviced and ready to work. Reduced price...
1997 MORBARK 1300 - TUB GRINDER
New clutch and several upgrades. Out-of-frame Cat rebuild. Includes lots of extra parts (pallets ...
1997 MORBARK 1100
New paint, auger floor, control panel, remote/receiver, hammers, tips, belt, mill bearings, hydra...
2001 MORBARK 1300WCL
New hammers, rods, and tips. A few minor hydraulic leaks. Torque limiter needs new grease. Hours: 9601
2005 MORBARK 4600
New clutch, new chains. Some extra tips and screens. Well maintained. Hours: 2577 | Engine: 860HP Cat 3412
1997 MORBARK 1200
No hour meter Reduced price (was $115,000) Engine: 650HP Cat
2017 NEUENHAUSER 2F
2 fraction. 170mm (6-11/16" stars) Hours: 1530 | Engine: 130HP John Deere
2017 NEUENHAUSER STARSCREEN 2F
10yd hopper, 26" fines conveyor, 48" overs conveyor, heavy duty tracks, and wireless remote. Use...
2006 NEUENHAUSER 2F
Includes 2 screen decks; 230mm (9") diameter and 300mm (12") diameter stars (the second was rebui...
1995 Olathe 867TG
Has a bunch of extra parts that will come with it. Conveyor rollers, bearings, tub rollers, scree...
2000 ORBIT SATELLITE
New Perkins engine with just 679 hours. 2 new belts, all new bearings for the basket. 1/2" screen...
2022 Peterson 2710D
Closest to new as you can get. Grinder is in perfect condition. Reduce price (was $765,000) Hours: 150
2023 Peterson BT60
Truck miles area 17,000. Unit bought new in July 2023. Looks and runs like new. Reduce price (wa...
2011 Peterson BTR90
Dust suppression system. Set up for 5" Camlock hose. Hours: 5471 | Engine Hours: 5471 | Engine: C7 CAT
2006 PETERSON PACIFIC 4710B
Grinder was upgraded by Peterson Pacific approx 400 hours ago (all that it's been used the last f...
2012 PETERSON PACIFIC 4710
Rebuilt Cat C18 (with 6500 hours). New feed chain with AR slides, belts with skirting and rollers...
2008 PETERSON PACIFIC 6710B
Out-of-Frame engine rebuild by Cat dealer (has Gold Cat warranty). New floor, rebuilt clutch. Hours: 10,000
2003 PETERSON PACIFIC BT60
BT60 mulch blower truck with after market re-gen system. Blower system works great, box needs som...
2005 PETERSON PACIFIC 4710B
New engine in 2012, rebuilt clutch, Pined rotor. Parker IQAN Controls installed with new wiring h...
2018 PETERSON PACIFIC 5710D
Includes transport dolly and magnetic belt system (approx $49k). Serviced by dealer Oct 2023 whic...
2005 PETERSON PACIFIC 4710B
New feed chains, radiator, belt drive motor, alternator, hammers, screens, starter, wear plate (a...
2006 PETERSON PACIFIC 7400
Includes several screens (6", 4", 3", 3"x4", and 2"x3") Hours: 7736 | Engine: 1050HP Cat
2002 PETERSON PACIFIC 4710B
3128 hours on Engine rebuilt by Cat. Includes lots of extra screens (new and used): 4 - 3" hex (...
2011 PETERSON PACIFIC 5710C
Well maintained grinder. Includes some extra parts. In great shape and ready to work. Reduced pr...
1999 PETERSON PACIFIC 5400 - HORIZONTAL GRINDER
New belly belt, new alternator, new starter, new batteries, new tips, rebuilt anvil, remote contr...
2016 PETERSON PACIFIC BT40
New transmission, engine since 2022. Truck and blower run great. Truck is a Kenworth T800 Reduc...
2003 PETERSON PACIFIC BT60
New floor. BT60 blower on Peterbilt 357 truck. Milage: 232,938 | Hours: 1185
2005 PETERSON PACIFIC 4710B
New crate engine (approx 500 hours ago). Has been used for orchard removal the last 500 hours. Ve...
2005 PETERSON PACIFIC 4700B Horizontal Wood Grinder
New clutch at 9,000 hrs. Engine rebuilt at 7,580 hrs. New bearing on belt at 9,096 hrs. Reduce p...
2014 PETERSON PACIFIC 4710B
Serviced and ready to work. Includes some extra parts. Hours: 5030 | Engine: 765HP Cat
1980 Pontiac Firebird Trans Am SE
Frame off full rotisserie restoration. Pontiac 301cid/4.9L Turbo engine rebuilt and bored out 30 ...
2014 Portafill 5000CT
4’x8’ screen deck Heavy duty variable speed feeder. Hydraulic folding hopper sides. Teather remote. Hours: 2600
2015 POWERSCREEN PREMIERTRAK 400
New jaw dies, Good running and ready to work. Hour meter reads for engine rebuild (actual frame h...
2019 POWERSCREEN CHEIFTAIN 1400
11' x 5' screen, wheel mounted Hours: 200 | Length: 55'-7" (for transport) | Width: 9' (for transport)
2008 POWERSCREEN WARRIOR 1800 - SHAKER SCREEN
Some extra parts. Nice condition. 2" hex perf plate. Control panel door has a bit of a bend and l...
2017 POWERSCREEN TRAKPACTOR 320SR
New items in 2022/2021: - All new belts (March 2022) - Many rollers, guards, and side plates -...
1995 POWERSCREEN CHEIFTAIN
Comes with approx. $15,000 in extra screens and parts. Good running screener. Hours: Unknown | Engine Hours:...
2017 POWERSCREEN TRAKPACTOR 320SR
Ready to work Reduced price (was $439,900) Hours: 2915 | Hopper Capacity: 9.4 cu. yd. | Length (Transport):...
2015 POWERSCREEN MAXTRAK 1150
New vulcanized feeder belt and metal detector. Fully rebuilt cone by dealer. Very good condition. Hours: 5284
2006 POWERSCREEN CHEIFTAIN 2100
Burn unit, good for parts. Engine was not running went burnt. Hours: 3228 | Engine: Deutz diesel
2004 POWERSCREEN TITAN 1800
Complete engine overhaul, new overs & crossover belts included (installed when sold). New tracks ...
2014 POWERSCREEN Phoenix 3300
New engine and pump within the last 6-12 months. Rebuilt engine, new main pump/pumps (all pumps t...
2019 POWERSCREEN WARRIOR 1800
Brand new tier 4 Cat engine installed Engine Hours: 30 | Engine: 110HP Cat Tier 4 | Length (Transport): 50'-6"
2022 PRECISION HUSKY PROGRIND 5200
New engine with 5yr/8500 hour platinum warranty (currently at 1000 hours). Fire suppression syste...
2008 PRECISION HUSKY PROGRIND H3060
48" discharge belt. Nice, clean unit. XB HPR00Z154T0H Hours : 6000 | Engine: 585HP Cat C15
2000 PRECISION HUSKY Progrind 1000
Has all new hammers in hammer mill, and new hydraulic motors on augers. Pintle hitch with electri...
2010 RAYCO RH1754-240 - HORIZONTAL GRINDER
New clutch, tires, drive belt, drum bearings, infeed belt, hammers and tips. Spare mill. 3 extra ...
2013 RAYCO RH1754-240
Comes with extra parts: Extra mill Rollers Box's of tips Filter Radiator Screens & more. P...
2014 RAYCO 1754-240
NJ HPR0000Z129T9H Hours: 600 | Engine Hours: 25 | Engine: 240HP
2015 RAYCO RH1754-240
Very good condition. Maintenance done on a regular basis. Was used on private property to clean up. Hours: 979
2022 REBEL 40' x 18" Pit Portable Radial Stacker
2 Available! (price is for each) 40' x 18" pit portable radial stacking conveyors They were pur...
2022 REBEL 20x36
Brand new engine installed (spare engine being repaired due to broken belt casuing an overheat). ...
2008 RECYCLETECH XT500
480v 3-Phase 100amp electric DB Hours : 9000 | Engine: Electric (480v 3-phase 100amp)
2023 REDLINE RM2318
18" x 15' electric conveyor, like new. Engine: Electric
2011 RED RHINO 2000 - JAW CRUSHER
Small crusher. Includes small conveyor Hours: 500 | Engine: Electric
2016 RED RHINO 7000 PLUS - JAW CRUSHER
Hours : 900
2015 RED RHINO 5000
20" x 10" jaw opening. Cordless remote with cord for charging. Custom rock shield to protect rear...
2014 RED RHINO 7000 PLUS - JAW CRUSHER
Jaws are 50% and the belts are good. Reduced price (was $125,000) Hours: 180 | Engine: Deutz
2017 RED RHINO 7000 PLUS
Includes cross magnet. Very light use, excellent condition. Hours: 170 | Engine: Deutz | Length (Working): 2...
2023 Red Rhino 3-Way Screener
Standard Features: Feed hopper Choice of screen meshes Remote control Hours 3 80 tonnes per ...
1996 REXWORKS MAXIGRIND 460G
Grapple, rebuilt hydraulic pump, 18' conveyor with magnetic head pulley. No remote. Reduce price...
2019 ROTOCHOPPER B66-T
Includes dolly and set of screens and any extra inserts and parts in hand. Excellent condition. Hours: 3621
2008 ROTOCHOPPER EC266
Stationary grinder with magnet, extra tips, and only 88 hours! Hours: 88 | Engine: 350HP Electric
2017 ROTOCHOPPER B66-T
New infeed 100hrs ago. Dsicharge conveyor and drive belts are fairly new. Cat warrenty on the eng...
2013 ROTOCHOPPER FP66
Complete factory overhaul at 9500 hours by Rotochopper, only 765 hours since. Shingle package. Hours: 765 (s...
2016 ROTOCHOPPER MP2
Hours: 2887 | Engine Hours: 2887 | Engine: 275HP CAT C7
2019 ROTOCHOPPER MP2
Includes colorizer and 18" cross magnet. Hours: 900 | Engine Hours: 900 | Engine: 350HP Cat C9 Tier 4
2021 ROTOCHOPPER MP2
Tier 4 engine, bulit in colorizer, and remote. 4", 1-3/4", and 1-1/4" screens. Include some extra...
2006 ROTOCHOPPER EC256
Includes spare electrical motor (250HP) and transformer (to operate at 600 or 480 volt). All cont...
2009 ROTOCHOPPER MC266
Very well maintained, always up to date on the maintenance checks. Just replaced bearings, drum, ...
2013 ROTOCHOPPER Go-Bagger 250
In excellent conditions. New Style upgraded Control panel Has the sealer Newer load cells Hours: 80
2011 ROTOCHOPPER Go-Bagger 250
Excellent condition Hours: 100 | Engine Hours: 100 | Engine: 25HP Kubota
2018 ROTOCHOPPER B66L
New main bearings and mill installed April 2020 (@1500 hours). New belly and discharge belts (100...
2023 ROTOCHOPPER MC266
Like new. Color ready. Has a gold 5-year warranty. HPR0000Z489T Hours: 860 | Engine Hours: 860 | Engine: 53...
2021 ROTOCHOPPER B66L
New coloring skid from Rotochoper, new clutch drive coupling, bell housing, clutch hydraulic moto...
2012 ROTOCHOPPER Go-Bagger 250
Excellent condition. Stored inside. Hours: 500 | Engine Hours: 500 | Engine: 25HP Kubota
2003 ROTOCHOPPER MC266
Axel/hitch have been reversed (wheels are now on the feed end, and king pin on the conveyor end). Hours: 2638
2010 ROTOCHOPPER B66
Shingle package from factory. Completely serviced. Very clean, Turn key ready to work. Was only u...
2006 ROTOCHOPPER Go-Bagger 250
This unit is electric only.
2013 ROTOCHOPPER Go-Bagger 250
Like new condition. Hours: 100 | Engine: Electric
2015 RR EQUIPMENT REBEL
New jaws, wear plates, and bolts. Has 2-deck screen attachment (not attached) Hours: 2200 | Engine: Deutz
2009 RR EQUIPMENT REBEL
New vibration assembly with bearings. New 11" side screen conveyor belt. Extra parts: 3 - Jaw D...
2018 RUBBLE MASTER RM60
Includes 8 extra blow bars, extra filters, extra conveyor rollers, and other misc parts. Deutz mo...
2022 RUBBLE MASTER RM90 GO!
Hours: 805 | Engine Hours: 805 | Engine: John Deere | Length (Transport): 44'-2" | Width (Transport): 8'-5"
2002 RUBBLE MASTER RM80
Engine rebuilt at 2750 hours (527 on it now). This was used as a secondary crusher and was taking...
2019 RUBBLE MASTER HS7500M - SCALPING SCREEN
5x16, 2-deck on tracks with tethered remote. 11(+)yd hopper. Reduced price (was $214,900) Hours: 1002
2022 RUBBLE MASTER HS11000M
2-Deck, 6'x20" box screen Adjustable screen 13° - 17° Feed capacity 11.3 cu.yd Output capacity...
2011 SANDBAGGER MULTIBAGGER M2
4-Chute bagger in excellent working order. Includes conveyor system. Hydraulic auger, agitator, a...
2015 SANDVIK QE341 - SCALPING SCREEN
5x16 screen with hopper extensions. 3/4" screens. California permitted tier 4 engine (Cat) Hours: 4000
2013 SANDVIK QJ241 - JAW CRUSHER
New jaw plate included. Reduced price (was $239,000) Hours: 1695 | Engine: Cat
2013 SANDVIK QA451
OZ Hours : 2800
2015 SANDVIK QE341
5x16 screen with hopper extensions. 3/4" screens. California permitted tier 4 engine (Cat) Hours: 4000
2017 SANDVIK UI310 - IMPACT CRUSHER
Excellent condition BA Hours : 2500 | Engine: Cat
2013 SANDVIK QI340 - IMPACT CRUSHER
Closed circuit impact crusher Reduced price (was $315,000) Hours: 3200 | Engine: Cat C13 | Length (Transpor...
2005 SCARAB 18
Great condition. Serviced and ready! Hours: 4202 | Engine: 540HP Cat
2016 SCARAB 20
Excellent condition, ready to work. 20' long by 8' tall tunnel. Hours: 1800 | Engine: 540HP Cat C15 Tier 3
2013 SCARAB 18
New Cummins engine (with 250 hours). Hours: 7153 | Engine Hours: 250 | Engine: Cummins
2001 SCARAB 8E99JDPT
8'x4' tunnel, 28" flail drum, cab with deluxe seat, AC/heat. Hydralic drum drive. 2 wheel drive. ...
2008 SCREEN MACHINE 516T
JM Hours : 2515 | Length (Transport): 47'-6" | Width (Transport): 9'-11" | Height (Transport): 11'-6" | Leng...
2013 SCREEN MACHINE 612W
1/2" screens. Good condition and ready to work. Was used for compost. Reduced price (was $99,000) Hours: 4363
2002 SCREEN USA TS4008
Was purchased used in 2022 but only ran a couple of hours. Runs great. Engine: 33HP Lombardi LDW2204 Diesel
2014 SCREEN USA TROM 406HMSL
1/2" screen installed and extra 1" screen. Hours: 1601 | Engine: Yanmar 3TNV88
2017 SCREEN USA TROM 512
Hour meter last read at 391 in early 2022 before the glass busted, but has only been used less th...
2002 SCREEN USA TORNADO STAR 4012DLX
New stars (and replaced shafts as needed), new control panel, new rubber guides/guards, new feede...
2019 SCREEN USA TROM 512
1/2" screens installed and set of 1" screen included. Excellent condition Reduced price (was $13...
2007 SCREEN USA HM35D2
Needs remote control (approx $1800), hour meter, and bearings for tipping grizzly. Rad Deck: 3/4...
2020 SCREEN USA TC6036
Was sold new, but never used Hours: 7 | Engine: Deutz 2.9L Tier 4
2015 SCREEN USA TROM 6090
Excellent condition. Has hammermill. Includes 1/2" and 1/4" screens. Hours: 1765 | Engine: 48HP Yanmar diesel
2022 SCREEN USA TROM 512
In yard and ready to ship! 3/4" screens installed with single brush. Track mounted. 3.2 Yard Hopp...
2022 SCREEN USA TC5036
In the yard and ready to ship! 50' x 36" Track mounted, folding conveyor. FRAME - Deep folded ...
2022 SEBA 70-40
In the yard and ready to ship! The One-man operation, tracked, jaw crusher. - Built in camera (j...
2017 SEBA 50-30
Hours: 130
2024 Senya 3
Big reduce price! Hours: 147 | Engine Hours: 147 | Engine: 50HP Yanmar
2000 STI Bag Line
Nearly complete bagline system (only needs 24' conveyor from bulk to volumetric hopper and air co...
2023 Tana 440DT
Single shaft shredder, great for tires, C&D, etc. Has a screen box and comes with several screens...
2024 TEREX Phoenix 2100
Brand new, has 1/2 inch screens. Hours: 65 | Engine Hours: 83 | Engine: CAT | Length (Transport): 58'-8"
2008 TEREX/PEGSON 1000SR
Clean and ready to work. HPR0000Z269T0H Hours: 3000 | Engine: Cat C9
2007 TEREX XA400
45" x 40" jaw opening. 30" wide fines and discharge conveyors. Hours: 1759 | Engine: Cat C9
2022 TEREX CBI 6800CT
Good condition. Hours: 430 | Engine Hours: 430 | Engine: 1050HP CAT C27 Tier 4 Final
2013 TERRA SELECT T6
3/8" screens, helix drum. Needs new drum at some point soon. Reduced price (was $129,000) Hours: 3400
2011 TERRA SELECT T3
New dirty discharge belt installed and some idlers. 8-1/2' x 5' drum with 1-1/2" screens. A coupl...
2021 TH Glennon Mulch Color Jet
One owner machine, downsizing operation.
1996 TORO PROGRIND 900
Includes 30' x 16" conveyor. Will need new hydraulic switches for tub (lift and rotation), and ne...
1996 Toro Pro Grind 5000
Brand new radiator, new clutch (with 2 additional new clutchs), new EMC, new computer, new color ...
2020 ULTIMATE BAGGER UR00LB
Generator not included. Was purchased new and only used 6-7 hours per day, 4-5 days per week. De...
1990 UMWELTSCHUTZ NORD MAULWURF 5 - SHAKER SCREEN
German made, 25 ton scalping, pulverizing, and screening machine. Roughly 7' x 12' shaker box, pl...
2013 VERMEER TR626
Comes with 3/4" and 1/4" screens. Real good condition. Hours: Unknown | Engine Hours: Unknown | Engine: 125H...
2012 VERMEER HG8000
Drive belt for hammermill, anvil, and wear plates around hammermill replaced at 3763 hours Reduc...
2006 VERMEER TG7000
All functions work, no leaks. Mill could use some hard facing. Hours: 7000 | Engine: Cat 3412
2012 VERMEER HG6000TX
New engine (less than 15 hours). Hardfaced, series 11 duplex mill with new hammers and tips. New ...
2018 VERMEER HG6800TX
Includes transport dolly. Hours: 2964 | Engine Hours: 2964 | Engine: 1000HP Cat C27
2012 VERMEER TG5000
Hours: 3540 | Engine: 540HP Cat C15
2020 VERMEER HG6000TX
Includes transport dolly. Excellent condition. Reduced price (was $575,000) Hours: 1418 | Engine Hours: 1418
2013 VERMEER HG4000 - HORIZONTAL GRINDER
Was only used for grinding pallets. Reduced price (was $189,000) Hours: 1886 | Engine: 440HP Fiat
2013 VERMEER 626
Includes 1/8", 1/4", and 3/4" screens. Reduced price (was $125,000) Engine: 125HP John Deere
2020 VERMEER HG6000
Cleated Viper conveyor w/super slice, Axial magnetic drive pulley, series III duplex drum. Cat C1...
2013 VERMEER HG6000
Engine blown and needs a rebuild. Available as-is or with rebuild done for an additional $79k. Hours: 6000
2013 VERMEER HG4000
New infeed floor installed. Excellent condition. No DEF motor. Include 5th wheel dolly (for movin...
2018 VERMEER HG6000
Ready for work. Low hours. One owner. Has a high capacity cooling package. Hours: 1780 | Engine Hours: 1780
2015 VERMEER HG4000 - HORIZONTAL GRINDER
New mill, hammers, tips, and mill bearings. Like new. Demo hours only, never put into service. Hours : 1296
2004 VERMEER HG6000TX
Cat rebuilt engine in 2020. Includes extra screens and tips Engine Hours: 1600 (on rebuild) | Engine: Cat C1...
1995 VERMEER TG400
Over 20,000.00 was spent on parts during repairs, plus labor, including new belly conveyor new sh...
2018 VERMEER HG6000TX
Includes transport dolly. 4" square screens. Many new wear parts (discharge conveyor pads, infeed...
2004 VERMEER HG525TX
New engine installed (now at 2000 hours). New belly and discharge belts, lid skin, and infeed rol...
2015 VERMEER TR620
Does not have any brushes screens in the drum. Hours: 4000 | Engine: Cummins
2023 VERMEER HG4000
Like new. Screen hoist. Air compressor, overhead magnet, damage defense system, axial magnetic dr...
2018 VERMEER TG7000
New hammers, new wedges, new tires and brakes. Recent full service on motor. New conveyor belt. Hours: 5025
2018 VERMEER HG6800
Hours: 4700 | Engine Hours: 4700
2018 VERMEER HG6800
Well maintained and ready to work. Reduce price (was $524,000) Hours: 6333 | Engine Hours: 6333 | Engine: 1...
2018 Vertimax 3042-50TR
30' body pull type spreader. Vertical beaters. 100,000 lb trailer track system, Digi-Star NT8000i...
1996 VIPER 101
Includes 95' Viper 80 stacker. 3/8" screen installed Engine: 40HP Deutz
2015 WILDCAT CT616
Nice, clean and great running turner. Hours: 3050 | Engine: John Deere
1998 WILDCAT LS177A
Twin Disc SP211HP3 Hours: 2386 | Engine: John Deere 6068T
2016 WILDCAT 626
Has 3/8" screens in it. Hours: 7282 | Engine Hours: 7282 | Engine: 125HP John Deere
2007 WILDCAT 626
Engine rebuilt around 2019 with custom aluminun radiator. New oil cooler and slide on the overs c...
2006 WILDCAT TS616
Serviced and ready to work. Replaced flails, radiator, and air-to-air cooler. Includes extra sect...
2012 WILDCAT 626
Includes 1/2" and 3/8" screens. Was used for screening and coloring. Will be completely cleaned. Hours: 3565
2022 XAVA LS28-3
New, Never Used. Comes with extra screen 1 ½” X 1 ½”, ½ X ½”, 2/3” X 1/2” 230-460 Volt. 60 Hz ...
24x50 Conveyor
24" x 50' conveyor. Road legal (8'-4" width)
2018 CAS RL34
34' x 36" reloader conveyor Hours: 159 | Engine Hours: 159 | Engine: 68HP Yanmar Tier 4 diesel
1995 MORBARK 1100
New mill bearings and blocks, new drive shaft, motor has been serviced, new radiator few years ag...
2012 Terex Pegson XR400S
Terex Pegson XR400S, powerscreen/crusher with 8,000 hrs. Hours: 8000 | Engine Hours: 8000 | Length (Transpor...
2008 VERMEER TG5000
Very good condition, with remote. Hours: 5800 | Engine Hours: 5800 | Engine: 500HP CAT C15
2015 VERMEER WC2300XL
Excellent running machine in great condition. Hours: 2140 | Engine Hours: 2140 | Engine: 440HP CAT