Horizontal Grinders on GrinderCrusherScreen : Bandit, Biogrind, CBI, Diamond Z, Air Burner, Morbark, Packer, Peterson Pacific, Protogrind, Rayco, Rotochopper, Screen USA, Sundance, Vermeer, Zehr, and more. Wood Grinders, Portable Grinders. NEW and USED equipment

HORIZONTAL GRINDERS

2004 West Salem 4064 Big Brute

$249,000

Stock# M110112-1

Horsepower: 1050hp Cat 3412
Approx Hrs on Frame: 2100
Approx Hrs on Engine: 2100
F.O.B.: West Coast, USA - PS

Notes:
•  WSM Model 4064BH Horizontal heavy duty 
   wood hog with pivoting rear housing.  
   40” diameter x 64” wide rotor with 
   rigid hammers, reversible/replaceable 
   liners, breakaway anvil and screen 
   section, hydraulic opening and 
   spherical roller bearings.  Equipped with 
   24 rigid 115 lb. hammers with 
   reversible  bottom tips.  
•  Powered infeed mechanism with massive 
   powered feed roll (44” diameter) 
   with hydraulic controlled pressure 
   and hydraulic drive system
•  Chain infeed conveyor, 62” wide by 
   18ft.long. Four strands of #110 drag 
   chain with self cleaning head and tail 
   drums and hyd. Drive
•  48” wide troughing roll conveyor 
   discharges at approximately 16 ft.  Belt 
   is equipped with cleats for incline 
   and  a self cleaning tail pulley.  
   Conveyor folds for transport.
•  Magnetic tail pulley with stainless 
   steel pan for diverting ferrous metal.  
   Also equipped with overhead self 
   cleaning magnet with adjustable 
   support, magnet with cleaning belt, 
   drive and stainless steel discharge chute
•  Caterpillar model 3412 diesel engine 
   is rated 1082 hp (807 KW).  Equipped 
   with many options including diagnostics, 
   wet clutch by PT Tech, 400 gallon fuel 
   tank, hydraulic power unit with 150 
   gallon tank, PLC controls with 
   “intellifeed" variable speed feed 
   system. Engine has less than 2,100 hours. 
•  Trailer is triple axle with brakes on 
   all axles and is equipped with fifth 
   wheel coupling, lights, fenders, tool 
   box.  Overall travel dimensions are 
   13’6” high x 10’ wide x 48’ long.  
   Hydraulic landing gear
•  Remote radio control by Applied 
   Electronics  operates infeed system
•  Automatic reversing fan provides selectable 
   or automatic cleaning of the radiator.
•  Air compressor for maintenance tools

GCS Green Machine

$219,000

Stock# H110208-1

Engine: 85hp Diesel
Approx Hrs on Frame: 0
Approx Hrs on Engine:0
F.O.B.: South East, USA - HB

Notes:
            
10 Yard Hopper   (6’-10” wide x 20’-0 Long)                                            
54” wide x 16’ variable speed belt feeder                                            
48” wide x 90’-0 long discharge conveyor (makes 47’-0 tall piles, 42’ from center of pile to tires)                                           
Conveys up to 500 – 800 yph                                           
85 HP Diesel Engine (CAT / Cummins / John Deere                                           
89 Gallon Fuel Tank                                           
150 Gallon Hydraulic Tank                                           
Remote Control:  Power Radial, Raise & Lower of discharge conveyor, emergency stop
Weight: Approx. 55,000 lbs.
Transport width:  12' - 4" wide (must remove swivel wheels)

GCS Waste Density Wizard 1200

Stock# H120705-3

$189,000

Engine: Electric
Approx Hrs on Frame: 0
Approx Hrs on Engine: 0
F.O.B.: Mid Atlantic USA - OZ

Notes: The GCS waste wizard uses a unique system to separate mixed debris into sorted wood, aggregate, plastic, silt and more. It uses shaker screen, air separator, and water separation to organize a pile of leftovers into usable product. The 3 stage process includes: Shaker screening to sort the fines, air separation with variable air flow to pull light materials, and water separation to separate heavy materials from lighter materials.
The GCS Waste Wizard 1200 which can take raw materials 12 inch minus and has a low water consumption of 1.6 gallon per minute
Production rate;
If 70-80% Rock, approx. 80 tons per hour
If 1-10% Rock, approx. 25-30 tons per hour

GCS Waste Density Wizard 1000

Stock# H120705-2

$159,000

Engine: Electric
Approx Hrs on Frame: 0
Approx Hrs on Engine: 0
F.O.B.: Mid Atlantic USA - OZ

Notes: The GCS waste wizard uses a unique system to separate mixed debris into sorted wood, aggregate, plastic, silt and more. It uses shaker screen, air separator, and water separation to organize a pile of leftovers into usable product. The 3 stage process includes: Shaker screening to sort the fines, air separation with variable air flow to pull light materials, and water separation to separate heavy materials from lighter materials.
The GCS Waste Wizard 1000 which takes 7 inch minus raw material and has a low water consumption of 1 gallon per minute
Production rate;
If 70-80% Rock, approx. 70 tons per hour
If 1-10% Rock, approx. 20-25 tons per hour

NEW HammerHead horizontal grinders from ScreenUSA and various brand USED horizontal grinders and incinerators

WEST SALEM

VERMEER

SUNDANCE

SCREEN USA

REXWORKS

PETERSON

PACKER

MORBARK

GCS

DIAMOND Z

BANDIT

CBI

AIR BURNER

* Click a brand name above to see what models we have available *

DOPPSTADT

CMI

RAYCO

2004 CBI 4800

Stock# J132404-1

$299,000

Engine: 880HP Cat 3412
Approx Hrs on Frame: 2425
Approx Hrs on Engine: 2425
F.O.B.: Southeast USA - OD

Notes: New tires all around, New 60” wide 5 ply in feed conveyor, New 60” Discharge conveyor 3 ply Cleetlock, New 60” Phase one winged tail pulley, New 60” 20 degree troughing idlers on discharge conveyor, New UHMW plastic slide bed under Discharge conveyor, New fan and alternator belts, New interior wear plates and anvil liner, New steel fabricated rear fenders, New skirt board rubber throughout entire machine, Replaced SP318S004 Twin disc Clutch, Completely new set of striker teeth. Built up strike lobes on Main rotor to factory spec. Auxilary hydraulics for cross belt magnet. Upgraded electronics and remote. Water spray bars on upper feed roller and inside grinding mill. Completely serviced and ready to work